Connections
Connecting to a TV or audio system
Connect the player to your TV or audio system.
For details of output sound, see 40 .
Connecting to a TV
Signal flow
To AV OUT
|
| (red) |
| |
| To audio inputs |
| TV or monitor with | |
Audio/video | (white) | audio/video inputs | ||
| ||||
|
| |||
cable (supplied) |
|
|
| |
| To video input |
|
| |
|
| (yellow) |
|
• Make the following setting.
Select: | Page | ||
|
|
| |
“Digital Out” | “Analog 2ch” | 46 | |
50 | |||
|
| ||
|
|
|
Notes
If you connect an audio/video cable (external output cord) to the
•Refer to the owner’s manual of the connected TV as well.
•When you connect the player to your TV, be sure to turn off the power and unplug both units from the wall outlet before making any connections.
•Connect the player directly to your TV. If you connect the player to a VTR, TV/VTR combination or video selector, the playback picture may be distorted as DVD video discs are copy protected.
To switch LCD screen / Memory Card / AV-IN
Select a mode other than
Press MODE button on the player.
Each time the button is pressed, the
LCD will change as below.
Normal
Memory Card
AV-IN
Normal: | Outputs video and audio to the LCD |
| of the player only. |
Memory Card: To switch to the Memory Card mode.
| Inputs video and audio from an |
| external device such as a VTR |
| connected to the LCD of the player, |
| thus allowing you to view video on |
| the LCD of the player. |
Note
•Normal will be set the next time the player is turned on even if you turn the power of the player off while
54