4.2 FAQ
I pressed ’Iq’ , but nothing appears on the LCD.
There is no battery in the player or the battery is dead. Replace
the battery.
The key lock function is on. Slide back the ’Hold’ hold button to switch off the key lock function.
My computer does not recognize my TrekStor i.Beat joy 2.0 .
You are using Windows 98 and have not installed the driver. Install the driver as described in section 3.2.
The firmware has been damaged. To solve this problem, follow these steps:
–Remove the battery.
–Connect your TrekStor i.Beat joy 2.0 to your computer and hold down the ’Iq’ button for approximately 3 seconds.
–Your TrekStor i.Beat joy 2.0 should appear in ’My Computer’ as a new drive. Update the firmware as described in sec- tion 4.1.
There is less memory available than I though. Several factors can affect the exact number of bytes available.
TrekStor i.Beat joy 2.0 | 21 |
|
|