www.AmericanAudio.us
amplifiers
Output Power
V4001plus
EXCLUSIVE
CONTRACTOR
SMART™ FEATURE**
V5001plusV6001plus
2 ohms, 1 khz 1% THD
4 ohms, 1 khz 1% THD
8 ohms, 1 khz 1% THD (Bridged Mode, mono) 4 ohms, 1 khz 1% THD 8 ohms, 1 khz 1% THD
Total Harmonic Distortion (THD)
Input Sensitivity & Impedance
@rated output power, 8 ohms Dimensions & Weight Height
Width Depth Weight Frequency Response ±1dB, 1W RMS 8 ohms
±0.3dB, @rated output, 8 ohms Hum & Noise
Below rated output, 8 ohms Signal to Noise Ratio
Slew Rate
Damping Factor @ 8Ω
Protection Circuit
Special Features
Power Consumption
120V AC / 240V AC
Cooling System
1530W RMS per channel plus1090W RMS per channel
660W RMS per channel
3000W RMS per channel
2170W RMS per channel Less than 0.1% @ 4 Ohms
1.0v rms (0 dBv)
3.5” (88cm) 19” (48.3cm) 15.9” (40.5cm) 31 lbs. (14kg)
10Hz - 40 kHz 20Hz - 20 kHz
400100 dB, unweighted >100dB
25v/usec
400
DC output protection
Overload protection
Short circuit protection
On & Off protection
Crossover
Contractor Smart™ Feature** Limiter
10A / TBA (8 ohms) Yes
2 dual speed fan & heatsink
2150W RMS per channel plus1500W RMS per channel
980W RMS per channel
4250W RMS per channel
3100W RMS per channel Less than 0.03% @ 4 Ohms
1.0v rms (0 dBv)
5.25” (13.3cm) 19” (48.3cm) 15.9” (40.5cm)
62 lbs. (28kg)
10Hz - 35 kHz 5Hz - 85 kHz
500100 dB, unweighted >100dB
25v/usec
400
DC output protection
Overload protection
Short circuit protection
On & Off protection
45A / 22.5A (4 Ohms) Yes
2 dual speed fan & heatsink
2530W RMS per channel
1920WplusRMS per channel
1260W RMS per channel
5100W RMS per channel
3650W RMS per channel Less than 0.03% @ 4 Ohms
1.0v rms (0 dBv)
5.25” (13.3cm) 19” (48.3cm) 15.9” (40.5cm)
62 lbs. (28kg)
10Hz - 35 kHz 5Hz - 85 kHz
600100 dB, unweighted >100dB
25v/usec 500
DC output protection
Overload protection
Short circuit protection
53A / 25.5A (4 Ohms) Yes
2 dual speed fan & heatsink
NO
NOTE - 1 Rackspace = Approx. 1.75” -
specifi cations subject to change without notice.