Alpine CDE-125EBT owner manual Specifications, 27-EN

Specifications

FM TUNER SECTION
Tuning Range	87.5-108.0 MHz
Mono Usable Sensitivity	9.3 dBf (0.8 µV/75 ohms)
Alternate Channel Selectivity	80 dB
Signal-to-Noise Ratio	65 dB
Stereo Separation	35 dB
Capture Ratio	2.0 dB
AM TUNER SECTION
Tuning Range	531-1,602 kHz
Sensitivity (IEC Standard)	22.5 µV/27 dB
CD PLAYER SECTION
Frequency Response	5-20,000 Hz (±1 dB)
Wow & Flutter (% WRMS)	Below measurable limits
Total Harmonic Distortion	0.008% (at 1 kHz)
Dynamic Range	95 dB (at 1 kHz)
Signal-to-Noise Ratio	105 dB
Channel Separation	85 dB (at 1 kHz)
PICKUP
Wave length	795 nm
Laser power	CLASS I
USB SECTION
USB requirements	USB 1.1/2.0
Max. Power Consumption	500 mA
USB Class	Mass Storage
File System	FAT 16/32
MP3 Decoding	MPEG-1/2 AUDIO Layer-3
Number of Channels	2-Channel (Stereo)
Frequency Response*	5-20,000 Hz (±1 dB)
Total Harmonic Distortion	0.008% (at 1 kHz)
Dynamic Range	95 dB (at 1 kHz)
Signal-to-Noise Ratio	105 dB
Channel Separation	85 dB (at 1 kHz)

*Frequency response may differ depending on the encoder software/bit rate.

BLUETOOTH SECTION
BLUETOOTH Specification	BLUETOOTH V 2.0
Output Power	+4 dBm Max. (Power class 2)
HFP	(Hands-Free Profile)
HSP	(Head Set Profile)

GENERAL
Power Requirement	14.4 V DC
	(11-16 V allowable)
Maximum Power Output	50 W × 4
Maximum Pre-Output Voltage	2 V/10 k ohms
Bass	±14 dB at 100 Hz
Treble	±14 dB at 10 kHz
Weight	1.5 kg (3 lbs. 4 oz)
CHASSIS SIZE
Width	178 mm (7")
Height	50 mm (2")
Depth	161 mm (6-3/8")
NOSEPIECE SIZE
Width	170 mm (6-3/4")
Height	46 mm (1-13/16")
Depth	25 mm (1")

•Due to continuous product improvement, specifications and design are subject to change without notice.

27-EN