Recovering Your T.sonic
If your T.sonic ever stops responding or locks up, you can use the Recovery program to restore it to its default settings. You can also use this function to update the unit’s Firmware.
Running the Recovery program will erase all of the data currently on the T.sonic.
If there are bad blocks in the flash memory chip of the T.sonic, the memory size of your T.sonic will be smaller than the original memory size after running the Recovery program.
Recovering the T.sonic in Windows 98SE
1.Remove the battery from your T.sonic and plug your T.sonic into an available USB port on
your computer. Select the 
button on the task bar and select Programs > Transcend
T.sonic 620 >> T.sonic 620 Firmware Update to run the T.sonic 620 Firmware Update program.
If you have not installed the Windows 98SE driver yet, please install it first.
2.The T.sonic 620 Firmware Update dialog box appears.
3.If the Format Data Area checkbox is checked. The Option message box will appear. Select Yes to continue.
27