Integrateed Series Speakers

ECLIPSE Integrated Series speakers are integrated concentric units that are designed to replace factory speakers for significantly better music fidelity.

Hybrid Mica PP Cone Woofer

The ECLIPSE speaker cone is hybrid mica PP for rigidity under intense power, ensuring distortion- free performance.

Butyl rubber surround

The butyl rubber surround allows linear cone excursion and dampens cone resonance for undistorted dynamic peaks and clarity at all levels.

Kapton voice coil former

Handles a large amount of heat without deforming.

Tweeter protection

A solid state device protects the speaker system from power overloads. This device will momentarily shut down the tweeter circuit, and will automatically reset when the condition normalizes.

Super tweeter (for SE8495, SE8375, SE8365, SE8355, SE8405 only)

To accommodate the extended high frequency response of DVD-Audio discs and to provide superior treble reproduction, the 3-way units incorporate a newly developed super tweeter that goes all the way out to 40kHz (typically 50kHz).

Small neodymium tweeter

The use of a neodymium magnet improves speaker efficiency.

SE8495 6 ⋅ 9˝ 4-Way

•RMS power handling: 75W

•Max. power handling: 220W

SE8355 5-1/2˝ 3-Way

•RMS power handling: 30W

•Max. power handling: 90W

SE8375 5 ⋅ 7˝ 3-Way

•RMS power handling: 40W

•Max. power handling: 120W

SE8405 4 ⋅ 10˝ 3-Way

•RMS power handling: 35W

•Max. power handling: 100W

	SE8495	SE8375	SE8465A
Size	6 ⋅ 9˝ 4-Way	5 ⋅ 7˝ 3-Way	4 ⋅ 6˝ 2-Way
Frequency Response	50 — 40,000Hz	85 — 40,000Hz	105 — 40,000Hz
Sensitivity	93dB	90dB	87dB
Hybrid Mica PP Cone	●	●	●
Rubber Surround	●	●	●
Kapton Voice Coil Former	●	●	●
Midrange Dome	—	—	—
Mylar Tweeter Dome	●	●	●
Super-Tweeter Dome	●	●	●
Neodymium Tweeter Magnet	●	●	●
Ferrite Woofer Magnet	●	●	●
Mounting Depth	3-1/16˝	2-1/8˝	1-3/4˝