Names and functions
Front
2
|
| POWER | VOLUME |
| ||
|
| ON | 4 | 5 |
|
|
|
| OFF | 6 |
|
| |
|
|
|
|
|
| |
1 |
|
| 3 | 7 | 3 | |
|
| 2 |
| 8 | ||
|
|
| 1 | 9 |
| |
|
|
| 0 | 10 |
| |
1)POWER switch
Turns on or off the unit main power.
1)POWER indicator
The power indicator is lit in RED when 6301D is turned on. When resolving to an incoming digital signal, the LED color changes to GREEN.
3)Output level control
Adjusts the output level of the internal power amplifier.
4)AC IN connector
Connect to the AC outlet using the supplied power cord.
Make sure that the AC outlet voltage matches the unit.
5)[ANALOG IN] connector (phone jack)
Receives a
6)[INPUT] select switch
Switches the digital input signal channel (L, L+R or R).
| Rear |
| |
INPUT SEL | ANALOG | DIGITAL |
|
| IN | THRU | IN |
R R+L L |
|
|
|
6 |
|
| 7 |
| POWER ON | 8 | |
5 | RED | POWER ON |
|
GREEN | LOCKED |
| |
|
|
| |
CAUTION
AVIS: RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS EQUIPMENT
TO RAIN OR MOISTURE.
4
7)[DIGITAL IN] connector (XLR-3-31 type)
This connector accepts an AES/EBU digital signal at the sampling frequency within the 44.1kHz to 96kHz range.
<CAUTION>: When a plug is inserted into the [ANALOG IN] terminal, the [DIGITAL IN] terminal is cut off.
Thus, no digital signal can be input.
| 3 |
|
| Pin 1 | Ground |
1 | Pin 2 | Hot (+) |
2 |
| |
| Pin 3 | Cold |
8)[DIGITAL THRU] connector (XLR-3-32 type)
This connector echoes the digital signal received at the [DIGITAL IN] connector.
| 3 |
|
| Pin 1 | Ground |
1 | Pin 2 | Hot (+) |
2 |
| |
| Pin 3 | Cold |
4