FIXED WALL MOUNT LOCATION
•This heater is designed for indoor use only.
•Do not locate the heater in front of or below a fixed socket outlet.
•Comply with the minimum clearance in front of or below a fixed socket outlet as shown in Figure 1.
•Do not install the heater where a draft is likely to affect the temperature setting.
MINIMUM CLEARANCES
|
| 18" | (450mm) |
|
|
|
|
| |
10" | (250mm) |
| 2 | FIG. 1 |
|
| |||
|
|
|
| |
| 2 |
|
|
|
2
6" (150mm)
FIXED WALL MOUNT OPTION–INSTALLATION
INSTALL ON THE WALL
STEP 1 | STEP 2 |
Refer to directions on following page
STEP 3
STEP 4
3