Introduction, Electrical Installation

Installation & Operation	Radiant Infrared Heater	Heat Controller

INTRODUCTION

Heat Controller’s infrared heater produces radiant heat that warms people and objects rather than the air surrounding them. The heater can be mounted on a wall or ceiling, and adjustable brackets allow the heat to be directed where desired.

This heater is designed for outdoor commercial use only.

ELECTRICAL INSTALLATION

WARNING: To assure safe operation, installa- tion must be done by a certified electrician and must adhere to local, state and national electrical codes.

4.Secure the electrical supply cable so it does not come in contact with the heater body or obstruct the air vents. Follow local and national electrical code requirements.

Use a certified ground fault protection device for wet environment installations.

1.Supply voltage must correspond to the voltage indicated on unit’s rating plate.

2.The cord from each terminal box must be hard wired and properly grounded.

WARNING: Each power supply circuit must be provided with a means of disconnection, and the disconnecting means must be grouped.

MINIMUM CLEARANCE DISTANCES FROM...

			ADJACENT
MODEL	FLOOR	CEILING	WALLS
IR30S	8' (2.44 m)	1' 8" (.51 m)	36" (.91 m)
IR60S	10' (3.05 m)	1' 8" (.51 m)	48" (1.22 m)

WALL-MOUNTED INSTALLATION

WARNING: Observe minimum clearances shown in chart above.

1.Securely fasten the L-shaped brackets to the mounting surface using both of the fixing holes in the short part of the bracket. NOTE: Wall bolts are not supplied: select an appropriate size to provide adequate support for the weight of the unit and taking into consideration any wind load conditions.

CAUTION: If there is any question about security of bolts and fixings, contact a professional con- tractor.

2.Mount the heater to the brackets with the terminal box at the bottom of the heater.

3.Adjust the heater to the desired directional angle, then fix in this position by tightening the fixing bolts on the brackets at the rear of the heater.

CAUTION: Do not position the heater at an angle greater than 50° or less than 30°.

CEILING-MOUNTED INSTALLATION

WARNING: Observe minimum clearances shown in chart at left.

1.Heater should be hung using non-flexible mount- ing brackets (not supplied). Select brackets that will maintain a minimum clearance of 1' 8" (.51 m) from the ceiling.

2.Bolts and fixings (not supplied) should be of an ap- propriate size to provide adequate support for the weight of the unit and any additional load resulting from wind conditions.

CAUTION: If there is any question about security of bolts and fixings, contact a professional con- tractor.

3.Secure the heater to the mounting brackets with the heater facing directly down.

4.Secure the electrical supply cable so it does not come in contact with the heater body or obstruct the air vents. Follow local NEC code require- ments.

ADJUSTING DIRECTIONAL POSITIONING

WARNING! Never attempt to move heater while it is operating. Personal injury could result.

1.Power to the heater from the main supply must be OFF to adjust the position. (Turn off circuit breaker.)

2.Allow the heater to cool before re-positioning the angle.

3.Loosen the fixing bolts on the brackets at the rear of the heater; re-position heater as desired, then re-tighten the fixing bolts.

CAUTION: Do not position the heater at an angle greater than 50° or less than 30°.

IR60S, IR30S specifications

The Heat Controller IR60S and IR30S represent powerful solutions in the realm of modern heating technology, specifically designed to deliver warmth efficiently and effectively. These models are ideal for both residential and commercial applications, ensuring comfort in various environments.

One of the standout features of the IR60S and IR30S is their advanced infrared heating technology. Unlike traditional heating systems that rely on convection, infrared heaters directly warm objects and people in their path. This results in an immediate sensation of warmth, making these models particularly effective in poorly insulated spaces or outdoor applications. The ability to focus heat exactly where it is needed translates to significant energy savings, as rooms are heated more quickly without wasting energy on heating the air.

Energy efficiency is further exemplified by their eco-friendly design, which not only reduces utility costs but also minimizes the carbon footprint. The IR60S and IR30S operate silently and without the need for fans, making them ideal for both quiet environments and spaces that require minimal disturbance. The lack of moving parts also means reduced maintenance and a longer lifespan for the units.

Both models boast sleek, modern designs that integrate seamlessly into various décor styles. The lightweight and portable nature of the IR30S makes it an excellent choice for users looking to move heating solutions from room to room. In contrast, the IR60S is suitable for larger areas, making it a powerful stationary option.

Another remarkable feature of these heaters is their user-friendly controls. Featuring intuitive temperature settings and safety mechanisms such as overheat protection, the IR60S and IR30S prioritize user convenience and safety. With adjustable settings, users can easily tailor their heating experience to suit their specific needs and preferences.

Furthermore, both models are designed with a focus on durability and performance. Constructed with high-quality materials, these heaters are built to withstand the rigors of daily use while providing reliable heated comfort year after year.

In summary, the Heat Controller IR60S and IR30S are exemplary heating solutions that combine advanced infrared technology with user-centric features. Their energy efficiency, portability, modern design, and robust safety features make them standout choices for anyone looking to enhance their heating experience. Whether for home or workplace, these models are pivotal in creating a comfortable environment, emphasizing both function and style.