Cowon Systems D3 manual + Buttons, + Charging

1.Power on/off : Press and hold the Power / Hold button

2.Hold on/off : Briefly press the Power / Hold button while the device is turned on

-The touchscreen is locked in hold status.

-Locking the touchscreen with the hold button can prevent any unwanted operations usually caused by unintentional inputs.

3.Sleep Mode: Within 2 seconds of entering into hold status, pressing the Power / Hold button again changes the device to lock screen status. With this status, waiting for a couple of seconds or pressing the Power / Hold button once again turns the device into sleep mode.

-In Music, Radio menu: Display off

-In other menus: Sleep mode

1.Use the USB cable to connect COWON D3 to the PC.

2.Check My Computer or Windows Explorer to see if COWON D3 is properly connected to the PC.

3.Copy multimedia files to COWON D3

4.After completing it, click the icon on the system tray.

5.When the following pop-up message shows up, conduct ‘safely remove the hardware’ process by clicking it.

6.Swipe down the status bar at the top of the display and touch ‘turn off USB storage’ and touch ‘turn off’ again.

*It is generally recommended for Android device users to use sleep mode to boot faster, and the battery consumption can also be minimized in sleep mode.

+Charging

Slide

7.Disconnect the USB cable from the PC.

-When disconnecting COWON D3 from the PC, be sure to conduct ‘safely remove the hardware’ process.

-Make sure the flash memory has enough free space to maintain the proper system operation.