Installation & Operation, Safety Hazards

Heat Controller	Radiant Infrared Heater	Installation & Operation

INSTALLATION & OPERATION

To provide additional protection against fire and injury, the installation of a ground fault circuit interrupter (GFI) is strongly recommended.

WARNING: For outdoor installation only!

1.Remove the heater from the packaging, and remove all packing materials including the anti- vibration foam around the emitter/lamp. Check the heater, power cord, and plug for any signs of damage. Do not install if damage is apparent.

2.Check the mounting materials (dowels and screws) to ensure that they are suitable to ensure a stable and secure mounting of the heater.

3.Select a location for mounting following these guidelines:

WARNING

SAFETY HAZARDS

The minimum safe mounting clearances and tilt angles must be strictly followed. See below and Figures 1 and 2.

a.The distance between the bottom edge of the heater and the floor must be at least 6' 7" (2.0m). See Figure 1.

b.The distance between the top of the heater and the ceiling/roof/overhead material must be at least 1' 6" (0.5m). See Figure 1.

c.The distance between each end and adjoining walls or surfaces must be at least 5' (1.5m). See Figure 1.

d.DO NOT mount the heater at any angle greater than 45o up or down from the horizontal position. See Figure 2.

e.The maximum swing rotation from side to side (right to left/left to right) is 90o.

4.Check to be sure the installation of the heater does not add excessive wind load.

5.Attach the mounting bracket to the wall, making sure that it is secure to support the weight of the heater. Keep in mind that mechanical bearing pressure and oscillation due to wind or rain could lead to loosening.

6.Plug the power cord into the electrical outlet.

7.Turn the unit on. The heater has a red ON/OFF switch located on the side of the unit.

8.Observe the operation for 10 to 15 minutes to be sure the unit is working properly.

If there is an operation problem, immediately turn OFF the heater and disconnect the power cord from the electric outlet.

9.Do not leave the heater unattended while operating. Turn the unit OFF when use is not desired.

Min. 1' 6" (0.5m)

Min. 5' (1.5m)

Min. 6' 7" (2.0m)

POWER:

1.5 kW, 120V-1-60

IR15S specifications

The Heat Controller IR15S is an innovative heating solution designed to provide efficient and effective warmth in various environments. Its sleek design and advanced technology make it a popular choice for residential and commercial spaces alike.

One of the key features of the IR15S is its infrared heating technology. Unlike traditional heating systems that rely on convection, which warms the air, the IR15S heats objects and people directly. This results in a faster and more efficient heating experience, as warmth is felt almost instantaneously. The infrared heating process is also energy-efficient, contributing to lower energy bills.

The IR15S is equipped with a powerful 1500-watt heating element, making it suitable for medium to large rooms. Its adjustable thermostat allows users to set their desired temperature, ensuring optimal comfort throughout various seasons. The unit also features a convenient remote control, which enables users to adjust settings from across the room without having to get up.

Another notable characteristic of the IR15S is its safety features. The device includes an overheat protection mechanism that automatically shuts the unit off if it detects excessive heat, providing peace of mind for users and preventing potential hazards. Additionally, its cool-touch housing ensures that the exterior remains safe to the touch, reducing the risk of burns.

The integrated fan in the IR15S helps to distribute heat evenly throughout the space, enhancing overall efficiency. This fan can be adjusted to different speed settings, allowing users to customize airflow according to their preferences. The unit also operates quietly, making it an excellent choice for bedrooms or office environments where noise might be a concern.

Portability is another advantage of the Heat Controller IR15S. With its lightweight design and built-in handle, it can be easily moved from room to room. This feature makes it particularly useful for individuals who may need additional heat in specific areas of their home or workplace.

In conclusion, the Heat Controller IR15S stands out as a versatile heating solution, combining infrared technology, safety features, and user-friendly controls. Its ability to provide instant warmth while maintaining energy efficiency makes it an ideal choice for anyone looking to enhance their heating experience. Whether for personal use or in a larger setting, the IR15S is designed to meet the diverse needs of its users.