Philips PET944/12 user manual Get started, Charge the battery

Page 12

3Get started

Caution

Use the controls only as stated in this user manual.

Always follow the instructions in this chapter in sequence.

If you contact Philips, you will be asked for the model and serial number of your player.The model number and serial number are on the bottom of your player. Write the numbers here:

Model No. __________________________

Serial No. ___________________________

Charge the battery

Caution

Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the bottom of the player.

Use only the supplied AC adaptor to charge the battery.

Note

The type plate is located on the bottom of the player.

1 Connect the supplied AC adaptor to the player and to the AC outlet.

»The charge indicator turns on.When the player is not in use, it will take about 8 hours to fully charge it. However, when in use, it will take more than 16 hours to fully charge it.

»When the battery is fully charged, the charge indicator turns off.

English

EN 13

Image 12
Contents 111 Contents Important safety instructions Hearing safety Recycling Your portable DVD player IntroductionWhat’s in the box Overview of the main unit Page Overview of the remote control Page Charge the battery Get startedInstall remote control battery Connect additional equipmentConnect aTV Use your player Turn onSelect OSD language Connect an SD cardPlay discs Play optionsSelect audio mode Play from SD cardRotate pictures Adjust settings Product information Ntsc & PALTroubleshooting Koninklijke Philips Electronics N.V. All rights reserved