Philips PET736C/55 user manual Install remote control battery

Note

•The type plate is located on the bottom of the player.

•You can only charge the player when it is in power-off mode.

1Slide the (CHR)OFFON switch to (CHR)OFF position.

2Connect the supplied AC adaptor to the player and to the AC outlet.

»The charge indicator turns on. It takes about 4.5 hours to fully charge the battery.

»When the battery is fully charged, the charge indicator turns off.

Install remote control battery

Caution

•Risk of explosion! Keep batteries away from heat, sunshine or fire. Never discard batteries in fire.

•Risk of decreased battery life! Never mix different brands or types of batteries.

•Risk of product damage! When the remote control is not used for long periods, remove the batteries.

•Perchlorate Material - special handling may apply. See www.dtsc.ca.gov/ hazardouswaste/perchlorate.

For first-time use:

1Remove the protective tab to activate the remote control battery. To replace the remote control battery:

1Open the battery compartment.

2Insert 1 CR2025 battery with correct polarity (+/-) as indicated.

3Close the battery compartment.

English

EN 15