Connect and charge

Select Install Philips Device Manager from the Internet.

Follow the on-screen instructions to complete the installation of the Philips Device Manager from the Internet.

Right click on Philips GoGear SA075.

Select My Computer (WindowsXP®

Ensure that your computer is connected to the Internet.

Select Install Philips Device Manager.

Follow the on-screen instructions to complete the installation of the Philips Device Manager.

Right click on Philips GoGear SA075.

Select My Computer (WindowsXP®

Use your fingertip to swipe over the list of icons on the screen.

Swipe in the direction that you want to scroll.

To quickly scroll through lists that are bigger than the screen:

SA075 has a built-in battery that can be charged through the USB port of a computer (USB cable included).

1 Connect the USB plug of the supplied USB cable to a spare USB port on your computer.

2 Connect the small USB plug of the USB cable to the small USB jack on SA075.

3 Turn on your computer. »» SA075 charges.

System requirements:

• Windows® (2000, XP, Vista)

• Pentium III 800 MHz processor or higher

• 128 MB RAM

• 500 MB hard disk space

• Internet connection

• Microsoft® Internet Explorer 6.0 or later

• USB port

1 Connect the mini USB plug of the supplied cable to SA075.

2 Connect the standard USB plug of the supplied cable to your computer.

»» A pop-up window appears on the computer.

3 From the pop-up window, select Install Philips Device Manager.

4 Follow the on-screen instructions to complete the installation of the Philips Device Manager.

If the pop-up window fails to appear on the

computer...

/ Windows2000®) / Computer

2 (WindowsVista®).

Cannot find the file on SA075?

/ Windows2000®) / Computer

3 (WindowsVista®).

Note

•• For first-time use, allow SA075 to charge for 3 hours.

•• The charging animation stops and the icon is displayed when the charging process is completed.

8EN