Connect and charge, Connect the earphones

Connect and charge

Warning

•Important: SA018 uses the USB connection with the computer to update internal software. To prevent data loss and product malfunction, do not disconnect during the update process.

SA018 has a built-in battery that can be charged as follows:

•through the combined headphone / USB jack of SA018, from a computer (with the supplied USB cable)

•through the combined headphone / USB jack of SA018, directly from the power supply (with a charger, sold separately)

Note

•While SA018 is connected to a computer or power supply, all controls and functions are inactive.

•SA018 remains in off-mode after charging process is completed.

Connect the supplied USB cable

1Connect the USB plug of the supplied USB cable to a spare USB port on your computer.

2Connect the special USB plug of the supplied USB cable to the combined headphone / USB jack on SA018.

3Turn on your computer.

»SA018 charges.

Note

•For ﬁrst-time use, allow SA018 to charge for 3 hours.

•While SA018 is connected to a computer, all controls and functions are inactive.

•The amber charging LED changes to green when the charging process is completed. For more information on LED status indicators, see section Status indicators and their meanings.

Connect the earphones

This is how to connect the supplied earphones:	English

Install the Philips Device

Manager software

System requirements:

•Windows® (2000, XP, Vista)

•Pentium III 800 MHz processor or higher

•128 MB RAM

•500 MB hard disk space

•Internet connection

•Microsoft® Internet Explorer 6.0 or later

•USB port

1Connect the mini USB plug of the supplied cable to SA018.

2Connect the standard USB plug of the supplied cable to your computer.

»A pop-up window appears on the computer.

3From the pop-up window, select Install Philips Device Manager.

4Follow the on-screen instructions to complete the installation of the Philips Device Manager.

EN 11