Heat Controller VMC18SB-1 Injury Electric shock or fire, Regularly, Harm your health, Product

Page 4

Safety Precautions

Indoor/outdoor wiring connections must be secured tightly and the cable should be routed properly so that there is no force pulling the cable from the connection terminals.

•Improper or loose connections can cause heat generation or fire.

Safely dispose of packing materials,

Make sure to check that the power cable

sharp objects (nails), plastic bags,

plug is not dirty, loose or broken and

batteries, etc. after installation or service.

then only insert the plug completely.

• Children may play with them and cause

• Dirty, loose or broken power plug can cause

injury.

electric shock or fire.

Please use the correct refrigerant type specified for the product. Please read the label on the product.

• Incorrect refrigerant used can prevent the

normal operation of the unit.

Do not place a heater or other heating

appliances near the power cable.

• There is risk of fire and electric shock.

Don't use a power cord, a plug or a loose socket which is damaged.

•Otherwise it may cause a fire or electrical shock.

Do not allow water to run into electric parts. Install the unit away from water sources.

•There is risk of fire, failure of the product, or electric shock.

Do not touch , operate, or repair the product with wet hands. Hold the plug by hand when taking out

•There is risk of electric shock or fire.

Do not store or use or even allow flammable gas or combustibles near the product.

•There is risk of fire.

Do not use the product in a tightly closed

space for a long time. Ventilate the room

regularly.

• Oxygen deficiency could occur and hence

harm your health.

Do not open the front grille of the product

If strange sounds, smell or smoke comes

during operation. (Do not touch the

from product.Immediately turn the breaker

electrostatic filter, if the unit is so equipped.)

off or disconnect the power supply cable.

• There is risk of physical injury, electric shock,

• There is risk of electric shock or fire.

or product failure.

 

Ventilate the product room from time to

Turn the main power off and unplug the

time when operating it together with a

unit when cleaning or repairing the

stove, or heating element etc.

product.

• Oxygen deficiency can occur and hence harm

• There is risk of electric shock.

your health.

 

Take care to ensure that nobody

Take care to ensure that power cable

especially kids could step on or fall onto

could not be pulled out or damaged

the outdoor unit.

during operation.

• This could result in personal injury and

• There is risk of fire or electric shock.

product damage.

 

When the product is not to be used for a long time, disconnect the power supply plug or turn off the breaker.

•There is risk of product damage or failure, or unintended operation.

Do not place ANYTHING on the power cable.

•There is risk of fire or electric shock.

Do not plug or unplug the power supply plug to turn the unit ON/OFF .

•There is risk of fire or electric shock.

When flammable gas leaks, turn off the gas and open a window for ventilation before turn the product on.

•Do not use the telephone or turn switches on or off. There is risk of explosion or fire.

Two or more people must lift and transport the product.

•Avoid personal injury.

Keep level even when installing the product.

•To avoid vibration or noise.

Do not install the product where it will be exposed to sea wind (salt spray) directly.

•It may cause corrosion on the product.

Do not install the product where the noise or hot air from the outdoor unit could damage or disturb the neighbor.

•It may cause a problem for your neighbors and hence dispute.

Install the drain hose to ensure that the condensed water is drained away properly.

•A bad connection may cause water leakage.

Always check for gas (refrigerant) leakage after installation or repair of product.

•Low refrigerant levels may cause failure of product.

4Room Air Conditioner

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Heat CONTROLLER, INC Table of Contents Before using it again Product by yourselfAge It may cause product to fallDo not place Anything on the power cable Keep level even when installing the productInjury Electric shock or fire RegularlyInstalling the product Uninstalling itHealth issues Water etcElectrical Safety Symbols used in this ManualTemporary Use of an Adapter Never use the appliance with a broken adapterProduct Introduction Indoor UnitsOperation Indication Lamps Outdoor UnitHow to insert the Batteries Wireless Remote Controller MaintenanceSignal receiver is inside the unit Operating InstructionsWireless Remote Controller ENERGY-SAVING Cooling Mode Button Used to save EnergyCooling Model Nd F ButtonOperation Mode Open the door of the remote controller and pressTurn the unit on Unit will respond with a beepAuto Clean TemperatureHealthy Dehumidification Operation Jet Cool OperationEnergy-Saving Cooling Mode Forced operationSleep Mode Setting the Current TimeTimer Setting Cooling mode or healthy dehumidification modeVertical / Horizontal Airflow Direction Control Optional AgainMaintenance and Service Indoor UnitOperation Tips Self-Diagnosis FunctionWastes electricity Is in operationTroubleshooting Tips! Save time and money Memo Room Air Conditioner No. MFL39817405

VMC09SB-1, VMC24SB-1, VMC12SB-1, VMC18SB-1 specifications

The Heat Controller VMC series, including models VMC12SB-1, VMC18SB-1, VMC24SB-1, and VMC09SB-1, represents a blend of advanced technology and efficient performance in climate control solutions. These models are designed to provide optimal heating and cooling capabilities suitable for various residential and commercial applications.

The VMC series features energy-efficient designs, utilizing high-quality compressors and fan motors that ensure effective temperature regulation while minimizing energy consumption. Each model is engineered with varying capacities, accommodating spaces of different sizes and needs. The VMC09SB-1, with its compact design, is ideal for smaller rooms, while the VMC24SB-1 can comfortably manage larger areas.

One of the standout characteristics of the VMC series is its use of inverter technology. This innovation allows for a more consistent temperature without the energy spikes associated with traditional HVAC systems. Inverter technology modulates the compressor speed, significantly enhancing energy efficiency and reducing operational costs. As a result, users can expect lower electricity bills while enjoying a comfortable indoor environment.

Each unit comes equipped with a programmable thermostat that facilitates user-friendly operation. This feature allows users to set specific heating and cooling schedules, optimizing energy use according to individual preferences. The VMC series also includes advanced air filtration systems designed to enhance indoor air quality. These filters trap dust, allergens, and other airborne particles, ensuring a healthier living space.

The design of the VMC models focuses on both aesthetics and functionality. They feature sleek and modern appearances that blend seamlessly into various interior styles. Additionally, the compact form factor of the units enables easy installation in tight spaces, providing versatility across different settings.

In terms of noise levels, the VMC series operates quietly, making them suitable for bedrooms, offices, and other spaces where minimal disturbance is crucial. This functionality, coupled with a robust warranty and reliable support, reinforces the value these heat controllers bring to consumers.

Overall, the Heat Controller VMC series, encompassing the VMC12SB-1, VMC18SB-1, VMC24SB-1, and VMC09SB-1, stands out for its efficiency, advanced features, and commitment to sustainability, making it an excellent choice for anyone seeking reliable climate control solutions.
Top Page Image Contents