Install software
GoGear Ariaz comes with the following software:
•Philips Device Manager (helps you get firmware updates for GoGear Ariaz)
•Media Converter for Philips (helps you convert and transfer video files for
GoGear Ariaz)
•Windows Media Player (helps you convert and transfer WMP media files for
GoGear Ariaz)
•Napster (helps you convert and transfer
Napster media files for GoGear Ariaz)
Note
•• Napster is available in Germany and in the UK only.
Important:
Remember to install the software provided in the supplied
Important: Before installing the software, check that your computer meets the requirements (see section System requirements in this user manual).
1
2
3 Follow the
If the installation programm fails to start automatically:
1
2
Connect and charge
GoGear Ariaz has a
Note
•• For
•• The charging animation stops and the icon is displayed when the charging process is completed.
Connect GoGear Ariaz to a computer
1 Connect the USB plug of the supplied USB cable to a spare USB port on your computer.
2 Connect the small USB plug of the USB cable to the small USB jack on GoGear Ariaz.
3 Turn on your computer. »» GoGear Ariaz charges.
Battery level indication
The display indicates the approximate levels of the battery status as follows:
100% 75% 50% 25% 0%
»» A flashing battery screen indicates that the battery is low.The player saves
all settings and switches off within 60 seconds.
Note
•• Rechargeable batteries have a limited number
of charge cycles. Battery life and number of charge cycles vary by use and settings.
•• The charging animation stops and the
icon is displayed when the charging process is completed.
8EN