Update GoGear Vibe
111Ensure that your computer is connected to the Internet.
222Connect GoGear Vibe to the computer (see section Connect and charge for instructions).
333On your computer, click Start > Programs > Philips Digital Audio Player > Vibe Device Manager to launch Philips Device Manager.
444Click Update.
>> Philips GoGear Vibe Device Manager checks for updates and installs new firmware from the Internet, if available.
555When the display shows Update completed, click OK. 666Disconnect GoGear Vibe from the computer.
>>GoGear Vibe restarts after the firmware is updated and is ready for use again.
en
17