Philips SA1VBE user manual Technical data, System requirements, Supported music file formats

16 Technical data

Power

Power supply: 290 mAh Li-ion polymer internal rechargeable battery

Play time¹ (music): 25 hours

Software on CD-ROM

Windows Media Player

Philips Device Manager

Media Converter for Philips

Napster player

Connectivity

Headphone 3.5 mm

USB 2.0 High speed

Sound

Channel separation: 45 dB

Frequency Response: 80 Hz - 18 kHz

Output power: 2 x 3 mW

Signal to noise ratio: > 84 dB Audio playback Compression format:

MP3 bit rates: 8 - 320 kps and VBR

MP3 sample rates: 8, 11.025, 16, 22.050, 24, 32, 44.1, 48 kHz

WMA bit rates: 5 - 192 kbps VBR

WMA sample rates: 8, 11.025, 16, 22.050, 24, 32, 44.1, 48 kHz

ID3-tag support Audible format support Video playback

SMV format support

Storage media

Built-in memory capacity²:

SA1VBE02 2GB NAND Flash

SA1VBE04 4GB NAND Flash

SA1VBE08 8GB NAND Flash

SA1VBE16 16GB NAND Flash

Music transfer³

Drag and drop in Windows® Explorer

Display

Color LCD 128 x 128 pixels

Note

•• ¹ Rechargeable batteries have a limited number of charge cycles. Battery life and number of charge cycles vary by use and settings.

•• ² 1GB = 1 billion bytes; available storage capacity is less. Full memory capacity may not be available as some memory is reserved for the player. Storage capacity is based on 4 minutes per song and 128 kbps MP3 encoding.

•• ³ Transfer speed depends on operating system and software configuration.

System requirements

•Windows® XP (SP2 or above) / Vista

•Pentium III 800 MHz processor or higher

•512 MB RAM

•500 MB hard disk space

•Internet connection

•Windows® Internet Explorer 6.0 or later

•CD-ROM drive

•USB port

Supported music file formats

GoGear Vibe supports the following music formats:

•MP3

•PCM

•ADPCM

•Audible

•WMA

Supported video file formats

GoGear Vibe supports the following video formats:

•SMV

32EN