Philips PET738/93 user manual Or no signal Again

Symptom	Remedy
Cannot switch to AV-	• Unplug the AV-in connection and plug-in
in or no signal	again.
	• Check the connection from the AV out-
	put device, such as digital camera, video
	recorder, etc.
	• Use the provided AV cable for connec-
	tion.
Switch between	• DVD mode is default source during the
DVD/USB/AV-in	DVD player power on.
	• Plug in USB will activate USB mode.
	Deactivate it by unplug the connection.
	• Plug in AV-in will activate AV-in mode.
	And deactivate it by unplugging the con-
	nection.
	• Do not plug-in USB & AV-in at the same
	time. Plug-in one type connection at a
	time only.
	• Unplug the connection before you plug-in
	another connection.
Player feels warm	When the player is in use for a long period
	of time, the surface will be heated.
	This is normal.
Display goes dimmer	The unit is saving power to ensure longer
when AC is unplugged	playtime with battery. It is normal.
	Adjust the brightness in the SETUP menu.

This set complies with the radio interference requirements of the European Union.