Philips PET745/12 Install remote control battery, Connect additional equipment, Connect a TV

Page 13

Install remote control battery

Caution

Risk of explosion! Keep batteries away from heat, sunshine or fi re. Never discard batteries in fi re.

Risk of decreased battery life! Never mix different brands or types of batteries.

Risk of product damage! When the remote control is not used for long periods, remove the batteries.

Perchlorate Material - special handling may apply. See www.dtsc.ca.gov/ hazardouswaste/perchlorate.

For fi rst-time use:

1Remove the protective tab to activate the remote control battery.

To replace the remote control battery:

1

2

3

Open the battery compartment.

Insert 1 CR2025 battery with correct polarity (+/-) as indicated.

Close the battery compartment.

Connect additional equipment

Connect a TV

You can connect the player to a TV to enjoy DVD.

Match the color of the AV cables (not supplied) with the jacks: the yellow cable is for the yellow video jack, the red/white cable is for the red/white audio jacks.

14EN

Image 13
Contents Register your product and get support at Contents Important safety instructions Listen at a moderate volume Hearing safetyRecycling Introduction Your portable DVD playerOverview of the main unit What’s in the boxEnglish Page Overview of remote control Page Get started Charge the batteryConnect additional equipment Install remote control batteryConnect a TV Turn on PlaySelect OSD language Play discsWatch TV First time settingsPlay options Set time Manual searchView program information Use the electronic program guide Access teletextRearrange the channel list Manage channelsDttv Adjust settingsProduct information TroubleshootingPage Koninklijke Philips Electronics N.V. All rights reserved