Philips PET741D/05 user manual Install remote control battery, Connect additional equipment

Page 13

Install remote control battery

Caution

Risk of explosion! Keep batteries away from heat, sunshine or fire. Never discard batteries in fire.

Risk of decreased battery life! Never mix different brands or types of batteries.

Risk of product damage! When the remote control is not used for long periods, remove the batteries.

Perchlorate Material - special handling may apply. See www.dtsc.ca.gov/hazardouswaste/ perchlorate.

For first-time use:

1Remove the protective tab to activate the remote control battery. To replace the remote control battery:

1Open the battery compartment.

2Insert 1 CR2025 battery with correct polarity (+/-) as indicated.

3Close the battery compartment.

Connect additional equipment

Caution

Turn off your player before connecting to any additional equipment.

You can connect the player to a TV or an amplifier to enjoy DVDs or Karaoke.

14EN

Image 13 Contents
Register your product and get support at PET741D/05 Contents Important safety instructions Hearing safety Recycling Set by the directive for lead Introduction Your portable DVD playerOverview of the main unit What’s in the boxPage Overview of the remote control Enter Get started Charge the batteryConnect additional equipment Install remote control batteryTip Turn on Use your playerSelect OSD language Play discsPlay options Adjust brightness of screen backlightAdjust settings Press to go back to previous menu level Press Setup to exit Ntsc & PAL Product informationTroubleshooting Koninklijke Philips Electronics N.V. All rights reserved