Panasonic SC-ZT1 warranty Adjusting sound quality, Adjusting the volume balance of front speakers

Page 21

Adjusting the surround speaker output using the test signal

You can make this setting when using the surround speakers. You can adjust the surround speaker volume by outputting the test signal.

1. Press [TEST] to output the test signal.

Speaker display

L : Front left, R : Front right,

RS : Surround right, LS : Surround left

The test signal is output from one speaker at a time for two seconds in the following order.

TEST L p TEST R p TEST RS p TEST LS

2.Press [VOL +, –] to adjust the volumes of front speakers to the normal listening

level.

Adjustment range: 0 (Min) to 50 (Max)

3.Press [CH] to select surround speakers for adjustment.

4.Press [SPEAKER LEVEL +, –] to adjust

each speaker’s output level.

Adjustment range: RS, LS : –10to +10

The test signal comes from the speaker being adjusted.

The test signal is output again in the above order 2 seconds after adjustment.

„Repeat steps 3 and 4 to adjust the level of each speaker.

5. Press [TEST] to stop the test signal.

Note

You can check the audio output of the front speakers.

(page 14) (When the surround speakers are not used, only “TEST L ” and “TEST R ” are displayed and the test signal is output alternately.)

To adjust the volume balance of left and right front speakers, see “Adjusting the volume balance of front speakers”

(right).

Even if you adjust each channel level in this adjustment, each

channel level setting in each SFC mode (page 17) does not change.

When you make this adjustment while using the front speakers only, Dolby Virtual Speaker functions. When playing 2-channel sources, Dolby Pro Logic also works in conjunction. (page 17)

To adjust the bass volume, do not output the test signal for adjustment. (page 20)

„Setup menu items

“BASS”

 

“TREBLE”

 

“BALANCE”

 

 

 

 

 

 

 

 

 

 

 

“SPEAKERS”

 

“DISTANCE”

 

“7.1CH VS”

 

 

 

 

 

 

 

“STB AUDIO”

 

 

 

“HDMI”

 

 

“SOUND DLY”

 

 

 

 

 

 

 

 

 

 

 

“DUAL PRG”

 

“DRCOMP”

 

“ATTENUATOR”

 

 

 

 

 

 

 

 

“REMOTE”

 

“INPUT MODE”

 

“RESET”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

“EXIT”

appears only when audio adjustment can be made.

Select “EXIT ” and press [OK] to finish the setup mode.

Adjusting sound quality

You can adjust the level of bass and treble.

This setting is effective only when you perform stereo playback of 2-channel analog and PCM signals (during Dolby Virtual Speaker and Dolby Pro Logic is off).

This setting is not displayed in other conditions. Be sure to make this setting in the above condition.

1. Press and hold [–SETUP, OFF] for about

2 seconds.

The setting items are displayed. (above)

2.Press [w][q] to select “BASS ” or “TREBLE ” and press [OK].

3.Press [e][r] for adjustment, and press

[OK].

Adjustment range: –6to +6

Factory setting: 0

4.Press [ RETURN] several times to select “EXIT ” and press [OK] to finish the setting.

Adjusting the volume balance of front speakers

You can adjust the balance of the front speakers.

1. Press and hold [–SETUP, OFF] for about

2 seconds.

The setting items are displayed. (above)

2.Press [w][q] to select “BALANCE ” and press [OK].

3.Press [w][q] for adjustment, and press

[OK].

L : Front left

R : Front right

Move the bar to left and right on the display to adjust.

As the bar gets closer to “L ”, the sound moves to left front.

As the bar gets closer to “R ”, the sound moves to right front.

4.Press [ RETURN] several times to select “EXIT ” and press [OK] to finish the setting.

Note

The bar indication is approximate.

When using headphones, you cannot adjust the volume balance.

Functions and settings

Play

21

RQT9471

Image 21
Contents „ SC-ZT1 Components Main unit control box part Warranty can be found onSpeakers If you have any questions contactImportant Safety Instructions Table of contents Installing the speakers Setting up your Home Theater systemSetting the speakers Enjoying movies and musicControl guide Supplied accessoriesMain unit Control box Front viewControl guide Base woofer part For switching the speaker ID switch ON/OFFSpeaker with built-in amplifier Rear viewRemote control Remote control preparationUsing the remote control Inserting the batteriesWireless functions Installation„ Equipment certification „ Restrictions for useBasic connections „ Hdmi cable notes„ Enjoying only with TV speaker Home Theater connections Video cable Digital audio out opticalAudio cable DVD player VCR, etcOther connections AC power supply connectionMain unit SpeakersSetting the speakers Speaker settingTurn the main unit on Turn 4 speakers onChecking the speaker setting Speaker settingControl to output the test signal Press Test on the remote control to stop the test signalPress and hold -SETUP, OFF for about 2 seconds Setting front speakers onlyChanging the number of speakers to Press er to select YES and press OKEnjoying movies and music Aim the remote control towardTurn Main unit of this systemEnjoying sound field effects What you can do with Viera Link Hdavi Control Using the Viera Link Hdavi ControlYou can select Speaker Selection Home Cinema or TV This system supports Hdavi Control 4 functionOut optical Main unit Set Viera Link Hdavi Control setting to OFF .Hdmi input Viera Link Hdavi Control Compatible EquipmentUsing WHISPER-MODE Surround Functions and settingsUsing Game Adjusting the bass woofer part outputAdjusting the volume balance of front speakers Adjusting sound qualitySetting distances Functions and settingsSetting 7.1-channel virtual surround Press er to select the distance and press OKSwitching between dual sounds Viera Link Hdavi Control settingClear audio at low volume Switching the attenuatorReset factory settings Switching the input signal detection setting„ Repeat steps 3 and 4 to change setting Input TV, DVD, AUX1, AUX2Using with headphones Error messagesSpecifications Display Check point/Cause/Countermeasure PagesTroubleshooting guide Maintenance Digital signals that can be played on this systemGlossary Worldwide patents issued & pending. DTS and DTS Digital If you see this symbolProduct information User memoLimited Warranty only for U.S.A. and Puerto Rico Limited Warranty only for Canada FCC Note Safety precautionsCorporation of North America Panasonic Corporation

SC-ZT1 specifications

The Panasonic SC-ZT1 is a remarkable soundbar that has captured the attention of audio enthusiasts and movie lovers alike. Designed to enhance your home entertainment experience, the SC-ZT1 combines innovative technology with sleek aesthetics to deliver immersive audio performance.

At the core of the SC-ZT1 is Panasonic's commitment to high-resolution audio. This soundbar supports various audio formats to ensure that your favorite music and movies come to life with stunning clarity. The device features a built-in high-performance amplifier that drives its multi-channel speaker configuration, producing a wide soundstage that envelops listeners in rich, dynamic audio.

One of the standout characteristics of the SC-ZT1 is its use of Dolby Atmos technology. This cutting-edge audio format creates a three-dimensional sound experience by adding height channels to the surround sound mix. As a result, users can enjoy more immersive audio while streaming movies or playing video games. The soundbar's upward-firing speakers contribute to this effect, reflecting sound off the ceiling to create a spatial experience that draws you deeper into the action.

Another noteworthy feature of the SC-ZT1 is its compatibility with Panasonic's proprietary Music Streaming services. With built-in support for Bluetooth and Wi-Fi connectivity, the soundbar allows users to seamlessly stream music from their smartphones, tablets, or other compatible devices. This versatility is further enhanced by integration with popular streaming services, ensuring that users can access their favorite music libraries with ease.

The design of the SC-ZT1 is both modern and functional. Its slim profile allows it to fit comfortably with a variety of television sizes, while its elegant finish adds an attractive touch to any room. The soundbar also comes with a remote control, allowing users to adjust settings effortlessly.

Finally, the SC-ZT1 includes various sound modes, such as dialogue enhancement and music optimization, which tailor the audio performance to suit different types of content. Overall, the Panasonic SC-ZT1 stands as a powerful option for those seeking a premium audio experience, whether for movie nights or simply enjoying music at home. With its advanced technologies and user-friendly features, the SC-ZT1 is sure to elevate any entertainment setup.