Philips PET744/05 Install remote control battery, Connect additional equipment, Connect a TV

Page 13

Install remote control battery

Caution

Risk of explosion! Keep batteries away from heat, sunshine or fire. Never discard batteries in fire.

Risk of decreased battery life! Never mix different brands or types of batteries.

Risk of product damage! When the remote control is not used for long periods, remove the batteries.

Perchlorate Material - special handling may apply. See www.dtsc.ca.gov/ hazardouswaste/perchlorate.

For first-time use:

1Remove the protective tab to activate the remote control battery. To replace the remote control battery:

1Open the battery compartment.

2Insert 1 CR2025 battery with correct polarity (+/-) as indicated.

3Close the battery compartment.

Connect additional equipment

Connect a TV

You can connect the player to a TV to enjoy DVD.

Match the color of the AV cables (not supplied) with the jacks: the yellow cable is for the yellow video jack, the red/white cable is for the red/white audio jacks.

14EN

Image 13
Contents Register your product and get support at PET744 Contents Important safety instructions Hearing safety Recycling Introduction Your portable DVD playerWhat’s in the box Overview of the main unit Page Overview of the remote control Page Get started Charge the batteryConnect additional equipment Install remote control batteryConnect a TV Turn on Use your playerSelect OSD language Connect an SD cardPlay options Play discsPlay from SD card Select audio modeRotate pictures Adjust settings Ntsc & PAL Product informationTroubleshooting Koninklijke Philips Electronics N.V. All rights reserved