Radio
Tuning to radio stations
1Press POWER to on, then press SOURCE once or more to select RADIO mode.(or on the remote control, B and RADIO/BAND). ➜Display: The waveband, radio station frequency and if programmed, a preset number are shown.
2Press BAND once or more to select your waveband: FM or AM (or RADIO/BAND on the remote control)
3Press and hold TUNING/CLOCK
the frequency in the display starts running.
➜ The radio automatically tunes to a station of sufficient reception. Display shows Srch during
automatic tuning.
4Repeat step 3 if necessary until you find the desired radio station.
●To tune to a weak station, press TUNING/ CLOCK
Storing preset radio stations
You can store up to 30 preset radio stations in the memory (20 FM and 10AM).
Manual programming
1Tune to your desired radio station (see “Tuning to radio stations”).
2Press AUTO PROG/ RADIO PROG to activate programming. (or PROG on the remote control).
➜ Display shows: current radio frequency and PROG flashes.
3Press PRESET
4Press AUTO PROG/ RADIO PROG to confirm.
➜Display: PROG disappears.
5Repeat steps
Helpful hints:
– You can erase a preset station by storing another frequency in its place.
Autostore: automatic programming
Autostore automatically starts programming radio stations from preset 1. Any previous presets e.g. manually programmed will be erased.
●Press and hold AUTO PROG /RADIO PROG until AUtO appears.
➜Available stations are programmed (20FM and 10 AM).
➜After all stations are stored, the first autostore preset station automatically plays.
To listen to a preset station
●Press PRESET
displayed (or on the remote control 3, | 4 ). | |
DVD |
|
|
| AV |
|
| SHUFFLE |
|
ERASE/WRITE |
|
|
CLOCKSET | PICTURE |
|
| VOL |
|
|
| 19 |