Harbor Freight Tools 93245 manual Releasing Debris, Parts List

OPERATION

1.Adjust the handle to the desired height, the handle telescopes from 30” L to 44-1/2” L.The 1. handle can be adjusted by loosening the Plastic Knob (12) and pulling up on the Plastic Handle This will extend the Thick Tube (2) from the Thin Tube (3). When the desired height level is reached, tighten the Plastic Knob (12) into place.

2.While holding the handle, roll the Magnetic Sweeper across the desired area such as a 2. workshop, garage, warehouse, etc.The Magnetic Sweeper will pick up metal objects such as nails, pins, bolts, screws and metal shavings.

3.To release the material that has been picked up by the Magnetic Sweeper, place the Aluminum 3. Body (9) over a trash can or desired debris destination. Pull up on the Adjustable Handle (11) as in Figure 1. Move the Sweeper away from the debris before releasing the Handle (11) or it will pick up the debris again.

Figure 1

Releasing Debris

Pull up on Adjustable Handle (11) to release material from Sweeper.

Parts List

REV 08e

SKU 93245 For technical questions please call 1-800-444-3353. Page 4