Philips AZ1856 Recorded files managing, Stop position, you may select an album to delete

Page 13

USB Connection

Recorded files managing

In your USB device, a folder named RECORD will be automatically created to manage all the recorded audio files.

In this folder, sub-folders starting from FMREC001, CDREC001,TapeRec001 is cre- ated to store the files recorded at different recording intervals (such as changing disc, re-plugging the USB device).

The recorded file(s) will be stored in either

.mp3 format (for CDDA music or MP3 file), or .wma format (for WMA file).

For MP3 and WMA file, the file name will be directly copied as recorded file name. For CDDA music file, the file name will be changed to F001T001, F001T002....

Helpful hints:

In recording mode (even the USB device is unplugged from the set), selections of track/album, play modes (repeat and shuffle modes) are not available.

Copyright-protected CD will not be recorded.

DRM-protected WMA is not supported.

Do not directly unplug the USB device to stop recording for a possible loss of some of the recorded contents.

For some USB device of low speed, the playback may go with muted sound for some seconds which will depend on the capability of the low-speed USB device.

During recording, if "Prt" is displayed, it means that the disc/file being played is either copy- right-protected CDDA disc or DRM-protected WMA file. Such disc/file will not be recorded. You need to change CD, or skip track(s).

During recording, if the display shows

2-second-flashing "Err", then "tr", it means that the file being played is invalid (un- recordable).You need to skip track(s).

During recording, if the display shows

2-second-flashing "Err", then "dup", it means that the file being played has been previously recorded due to the same file name as the previously recorded one. You need to skip track. Or you need to switch off and on again the set, a new sub-folder will be created to record it.

Deleting audio files/album on a USB device

1Adjust the source selector to DISC/USB.

2Press USB/CD to enter USB mode if USB is NOT displayed.

3Plug a USB mass storage device.

4Select the track you want to delete before or during playback.

In the stop position, you may select an album to delete.

5Briefly press DEL on the remote.

OELE” is displayed, flashing (see 9).

6To delete it, press DEL again.

The playback of the USB device will come to the stop position.

7To not to delete, wait until flashing “DEL” disappears after 4 seconds of flashing, or just press 9.

Helpful hints:

– For some MP3 players, AZ1856 will read it as only one folder which will wrap up all the audio files on the player regardless of more than one folder on that player.

– AZ1856 may not be able to delete a file /album stored on some MP3 players.

The making of unauthorized copies of copy-protected material, including com- puter programmes, files, broadcasts and sound recordings, may be an infringe- ment of copyrights and constitute a criminal offence.This equipment should not be used for such purposes.

Image 13
Contents Page DISC/USB Page Page Removing the insulation plastic tab Remote control See Supplied accessoriesControls Top and front panels SeePower Supply Power SupplyHelpful hints Cassette Recorder Basic Function/ RadioMP3-CD/ CD Player Cassette RecorderSelecting a different track MP3-CD/ CD PlayerFinding a passage within a track Programming tracksUSB Connection Using USB connectivitySelecting different play modes Adjust the source selector to Tape or FM Device will automatically power onUSB Connection CD/Tape/Tuner RippingStop position, you may select an album to delete Recorded files managingSafety information Safety & Maintenance SeeCassette recorder Disc standard TroubleshootingListen at a moderate volume Hearing SafetyTo establish a safe volume level Set your volume control at a low settingInformation Regarding USB Direct Class Laser Product