Philips AZ1836 user manual Deleting audio files/album on a USB device, Recorded files managing

Page 11

USB Connection

Recorded files managing

In your USB device, a folder named_PHILIPS will be automatically created to manage all the recorded audio files.

Under _PHILIPS folder, sub-folders starting from F001, F002, F003... will also be created to store the files recorded at different recording intervals (such as changing disc, re-plugging the USB device).

The recorded file(s) will be stored in either

.mp3 format (for CDDA music or MP3 file), or .wma format (for WMA file).

For MP3 and WMA file, the file name will be directly copied as recorded file name. For CDDA music file, the file name will be changed to F001T001, F001T002....

Helpful hints:

In recording mode (even the USB device is unplugged from the set), selections of track/album, play modes (repeat and shuffle modes) are not available.

Copyright-protected CD will not be recorded.

DRM-protected WMA is not supported.

Do not directly unplug the USB device to stop recording for a possible loss of some of the recorded contents.

For some USB device of low speed, the playback may go with muted sound for some seconds which will depend on the capability of the low-speed USB device.

During recording, if "Prt" is displayed, it means that the disc/file being played is either copy- right-protected CDDA disc or DRM-protected WMA file. Such disc/file will not be recorded. You need to change CD, or skip track(s).

During recording, if the display shows

2-second-flashing "Err", then "tr", it means that the file being played is invalid (un-recordable). You need to skip track(s).

– During recording, if the display shows

2-second-flashing "Err", then "dup", it means that the file being played has been previously recorded due to the same file name as the previously recorded one. You need to skip track. Or you need to switch off and on again the set, a new sub-folder will be created to record it.

Deleting audio files/album on a USB device

1Adjust the source selector to CD/USB.

2Press CD/USB to enter USB mode if USB is NOT displayed.

3Plug a USB mass storage device.

4Select the track you want to delete before or during playback.

In the stop position, you may select an album to delete.

5Briefly press DEL on the remote.

“DEL” is displayed, flashing (see 0).

6To delete it, press DEL again.

The playback of the USB device will come to the stop position.

7To not to delete, wait until flashing “DEL” disappears after 4 seconds of flashing, or just press 9.

Helpful hints:

– For some MP3 players, AZ1836 will read it as only one folder which will wrap up all the audio files on the player regardless of more than one folder on that player.

– AZ1836 may not be able to delete a file /albume stored on some MP3 players.

The making of unauthorized copies of copy-protected material, including com- puter programmes, files, broadcasts and sound recordings, may be an infringe- ment of copyrights and constitute a criminal offence.This equipment should not be used for such purposes.

Image 11
Contents Register your product and get support at MP3-CD SoundmachineR14 UM-2 C-CELLS Page Removing the insulation plastic tab Controls / Power Suppy Batteries Main set See Power SupplyRemote control Using AC powerMP3-CD/ CD Player Basic Function/ RadioProgramming tracks MP3-CD/ CD PlayerSelecting a different track Finding a passage within a trackSelecting different play modes See Using USB connectivityUSB Connection To record one USB ConnectionCD Ripping Recording disc files to a USB device Playing a USB mass storage deviceDuring recording, if the display shows Deleting audio files/album on a USB deviceRecorded files managing DRM-protected WMA is not supportedAlways close the CD door to avoid dust on the lens Safety & Maintenance SeeSafety information CD player and CD handlingDisc standard TroubleshootingEnvironmental information Set your volume control at a low setting Hearing SafetyListen at a moderate volume To establish a safe volume level
Related manuals
Manual 1 pages 24.08 Kb