Philips EXP320, EXP323 quick start Features

FEATURES FEATURES / ACCESSORIES

Playing tracks repeatedly or in random order-MODE

1Press MODE repeatedly during playback to select either:

–shuffle all : All tracks of the disc are played in random order once.

– shuffle repeat all : All tracks of the disc are played repeatedly in random order.

– repeat : The current track is played repeatedly.

– repeat all : The entire disc is played repeatedly.

– shuffle album (with MP3-CDs only):

All tracks of the current album are played in random order once.

–shuffle repeat album (with MP3-CDs only):

All tracks of the current album are played repeatedly in random order.

–repeat album (with MP3-CDs only):

All tracks of the current album are played repeatedly.

Your selected mode is marked by	,	,	above the playmodes,
album, shuffle, repeat all.

2Playback starts in the selected mode after 2 seconds.

3To return to normal playback, press MODE repeatedly until repeat and shuffle disappear.

Storing the last position played-RESUME

You can store the last position played. When restarting, playback wil continues from where you have stopped.

1Switch the slider to RESUME during playback to activate resume. y appears above resume.

2Press 9 whenever you want to stop playback.

3Press 2; to resume playback.

yPlayback continues from where you have stopped.

•To deactivate RESUME, switch the slider to OFF. y disappears from resume.

Locking all buttons-HOLD

You can lock all buttons of the set. When you press any key, no action will be executed then.

•Switch the slider to HOLD to activate hold.

y appears above resume and hold is displayed. All buttons are locked. When pressing any key, Hold is displayed.

•To deactivate HOLD, switch the slider to OFF. y disappears from resume or hold.

ESP and powersaving

With a conventional portable disc player the music may stop while you are jogging for example. The ELECTRONIC SKIP PROTECTION protects this set against loss of sound caused by light vibrations or shocks. Continuous playback is ensured. ESP does not protect the set against damage caused by dropping !

• Press ESP repeatedly during playback to select either:
y	is shown and ESP is switched on.	3:14

y disappears. Powersaving is switched on.

Belt Clip

1Align the belt clip as indicated in the illustration and press on the clip to insert its shaped pin into the hole in the set.

2	Turn the clip clockwise as indicated to lock the belt clip to
	the set.	1
•	To detach, gently lift the belt clip at the indicated end and
	turn it counter-clockwise.	2

In-car connections (supplied or optionally available)

Only use the AY 3545or AY 3548 car voltage converter (4.5 V DC, positive pole to the centre pin) and the AY 3501 car cassette adapter. Any other product may damage the set.

1Put the set on a horizontal, vibration-free and

stable surface. Make sure it is in a safe place,	12V DC
where the set is neither a danger nor an
obstacle to the driver and the passengers.	4.5V DC

2 Plug the voltage converter into the cigarette lighter socket (only for 12 V car battery, negative grounding), then connect the wired end with 4.5V DC input socket on the set.

3If necessary, clean the cigarette lighter socket to obtain a good electrical contact.

4Turn down the volume and connect the adapter cassette plug to LINE OUT/p on the set.

5Carefully insert the adapter cassette into the car radio’s cassette compartment.

6Make sure the cord does not hinder your driving.

7Start playback on the set and adjust the sound with the car radio controls.

•Always remove the voltage converter from the cigarette lighter socket when the set is not in use.

Note: If your car radio has a LINE IN socket, it is better to connect the set to this jack instead of using the cassette adapter. Connect LINE OUT / p of the set with the LINE IN jack of your car radio with an appropriate cable.