Philips SA2510 manual Insert the battery, Battery level indication, Connect to PC

Page 11

3.4 Connect

3.4.1 Insert the battery

1Remove the USB cap.

2Remove the battery door by sliding it in the direction of the arrow.

3Insert the supplied AAA battery into the battery compartment.

3.4.2 Battery level indication

The approximate power levels of your battery are indicated as follows:

Full

Two-thirds full

Half full

Low

Empty

Note When the batteries are almost empty, the low battery screen blinks. The player saves all settings and unfinished recordings and switches off in less than 60 seconds.

3.4.3 Connect to PC

Use the supplied USB cable to connect the player to the PC.

1Pull off the USB cap.

2Connect the supplied USB cable to the USB port at the bottom of the player, the other end to your PC.

9

Image 11

Contents Digital audio player Need help? Contents Hearing Safety Important safety informationGeneral maintenance Data logging Important for models supplied with headphonesCopyright information Modifications Disposal of your old productPage Register your product Your new playerWhat’s in the box Overview of controls and connections Getting startedMain menu InstallConnect to PC Insert the batteryBattery level indication ConnectEnjoy TransferFind your music Detail operationControl Limit the volume Auto tune radio stations Play a preset radio stationConnect the headphones Radio1Record from FM radio when the radio is not playing Save a new frequency under a presetRecord from FM radio when the radio is playing Upload recordings to the computer RecordingsPlay recordings Delete your recordingUse your player to store and carry data files SettingsManually verify software status Update your playerTechnical data Page Frequently asked questions Page Abc