5.Locate the desired ceiling location, and ceiling joists, upon which to attach the Air Filter System.
6.With assistance and proper lifting equipment (not provided), raise the Air Filter System to the desired ceiling location. Caution: Make sure all other people are kept well clear of the surrounding area during this procedure.
7.Align the four Hangers (part #31) with the ceiling joists and measure for eyelet bolt location. Then insert four eyelet bolts (not included) throught the ceiling into the underside of the ceiling joists. Note: Eyelet bolts must be of a size that are capable of safely supporting the weight of the Air Filter System. When hanging the Air Filter System, make sure each Hanger fits completely inside the loop of each eyelet bolt to insure a safe mounting of the Air Filter System. (See Figure C, and Assy. Diagram.)
CEILING JOISTS 
Air Filter System
CEILING
EYELET BOLT (not included)
HANGER (#31)
FIGURE C
The Manual Power Switch And Remote Control:
1.The Air Filter System is equipped with a manual Power Switch (part #19) and a hand held Remote Control (part #34). (See Figures D, E, and Assy. Diagram.)
3A CIRCUIT BREAKER
Remote Control (#34)
POWER SWITCH (#19)
FIGURE D
SKU 46361 | PAGE 6 | REV 07/03 |