Philips DCP851 user manual Technical Data

Symptom

Remedy

Disc can’t be played

– Ensure the disc label is upwards.

– Clean the disc.

– Check if the disc is defective by trying anoth-

er disc

The player does not

– Aim the remote control directly at the

respond to the remote

sensor on the front of the player. Avoid all

control

obstacles that may interfere with the signal

path. Inspect or replace the batteries.

Distorted or B/W

– Use only discs formatted according to the

picture with DVD

TV-set used (NTSC).

Player does not respond

– Operations are not permitted by the disc.

to all operating commands

– Refer to the instructions in the disc inlay.

during playback

Player feels warm

– When the player is in use for a long

period of time, the surface will be heated.

This is normal.

Display goes dimmer when

– The unit is saving power to ensure longer

AC is unplugged

playtime with battery. It is normal.

Adjust the brightness using the rotary bright-

ness control.

Dimensions

235 x 178 x 40 mm

Weight

909 g

Power supply

DC 9V 1.0A

Power Consumption

9W

Operating temperature range

0 - 45°C

Laser wavelength

650nm

Video system

NTSC

Frequency response

20Hz ~ 20KHz ± 1dB

Signal/noise ratio

≥ 80dB

Audio distortion + noise

≤ -80(1KHz)

Channel separation

≥ 80dB

Dynamic range

≥ 80dB

Output

Audio out (analog audio)

Output level: 2V ± 10%

Load impedance:

10KΩ

Video out Output level:

1Vp - p ± 20%

Load impedance:

75Ω