1 Connect
2 Connect one end to the DC socket on the main unit.
3 Connect the other end to the wall socket.
E Tip
• See the User Manual for how to connect other equipment to this system.
2 Setup
A Set the clock
1 In standby mode, press PROG to activate the clock setting mode.
» The 12 hour or 24 hour format is displayed.
2 Press J/K to select 12 hour or 24 hour format.
3 Press PROG.
» The hour digits are displayed and begin to blink.
4 Press J/K to set the hour.
5 Press PROG.
» The minute digits are displayed and begin to blink.
2 Setup
6 | Press | / | K | to set the minute. |
|
|
| J |
|
| |
7 | Press PROG to confirm. | B | |||
|
| |
3 | Enjoy | |
A | Play disc | |
1 | Press CD to select the disc source. | |
2 | Insert a disc into the disc compartment | |
| with the printed side facing up. | |
3Press 2; to start play.
• To stop play, press 9.
B Play from USB
DNote
•Ensure that the USB device contains playable audio content.
1 Connect the USB device into the 
socket.
2 Press USB to select the USB source. » The total number of tracks is displayed.
3 Press 3 4 to select a folder.
4 Press J/K to select a file.
5 Press 2; to start play.
bel a L
si
de
3
C
1AB
Press TUNER to select the tuner source.
2 Press and hold PROG for 2 seconds to activate automatic program mode.
» [AUTO] (auto) is displayed.
»All available stations are programmed
in the order of waveband reception strength.
3 Press J/K to select a preset number.
Play iPod/iPhone | Note for product |
DNote for product |
1 Install the supplied back plate, and load the iPod/iPhone in the dock.
2 Press iPod to select iPod/iPhone source.
»The connected iPod/iPhone plays
automatically.
• CTo pause/resume play, press 2; .
• To skip to a track, press J/K.
• To serach during play: press and hold 5/6, then release to resume normal play.
• To navigate the menu: press MENU, and press 3 4 J K to select, then press OK to confirm.
E Tip
Note for product
Detailed features and additional functions are described in the user manual.