Problem | Solution |
Remote | Before you press any function |
control does | button, select the correct |
not work. | source with the remote control |
| instead of the main unit. |
| Reduce the distance between |
| the remote control and the |
| main unit. |
| Insert the battery with its polarity |
| (+/– signs) aligned as indicated. |
| Replace the battery. |
| Aim the remote control directly |
| at the sensor on the front panel |
| of the main unit. |
No disc is | Insert a disc. |
detected. | Make sure that you place the |
| disc with its label facing upwards. |
| Wait until the moisture |
| condensation at the lens has |
| cleared. |
| Replace or clean the disc. |
| Make sure that the recordable |
| disc is finalized and the format |
| supported. |
USB storage | Make sure that the USB storage |
device is not | device is compatible with the |
supported. | product. |
| Try another one. |
Cannot | Make sure that the file format is |
play some | supported. |
files on the | Make sure that the file quantity |
USB storage | does not exceed the maximum. |
device. |
|
Radio | Increase the distance between |
reception is | the product and other electrical |
poor. | appliances. |
| Fully extend the antenna. |
| Connect an outdoor FM |
| antenna instead. |
Timer does | Set the clock correctly. |
not work. | Activate the timer. |
Clock/timer | Power has been interrupted |
setting is | or the AC power adaptor has |
erased. | been disconnected. |
| Reset the clock/timer. |
12 Notice
Any changes or modifications made to this device that are not expressly approved by WOOX Innovations may void the user’s authority to operate the equipment.
Compliance
This product complies with the radio interference requirements of the European Community.
This apparatus includes this label:
Class II equipment symbol:
CLASS II apparatus with double insulation, and no protective earth provided.
Care of the environment
Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.
EN 19