Connect with a Bluetooth device

Note

•The operational range between this unit and a Bluetooth device is approximately 10 meters (30 feet).

•Before you connect a Bluetooth device to this unit, familiarize yourself with the Bluetooth capabilities of the device.

•Compatibility with all Bluetooth devices is not guaranteed.

•Any obstacle between this unit and a Bluetooth device can reduce the operational range.

•Keep this unit away from any other electronic device that may cause interference.

Connect a device for the ﬁrst time

•This unit can memorize the connection information of up to 8 devices.

1Press BLUETOOTH to select the Bluetooth source.

2For an iPhone, load it in the dock for automatic re-connection setup.

3Press and hold PAIRING for more than 3 seconds.

»The Bluetooth indicator blinks.

4On the device, set up the Bluetooth connection:

a Enable Bluetooth to search for other Bluetooth devices. (Refer to the device user manual on how to enable the function.)

b When “ PHILIPS DC350” is recognized and displayed, select it to start to connect.

c When prompted for a password, enter “0000”.

5Wait until the Bluetooth indicator turns on.

»The connection is complete.

To connect more Bluetooth devices

1Disconnect the currently-connected device. (see ‘Disconnect a device’ on page 22)

2Repeat the steps 1-5 in “Connect a device”.

• If no connection is made within one minute, [FAILED] (failed) is displayed on the main unit.

EN 21