Philips DC290B Other features, Program radio stations manually, Select a preset radio station

Press SET TIME/PROG to activate the program mode.

Tune to a radio station.

»» All available stations are programmed in the order of waveband reception strength.

»» The first programmed radio station is broadcast automatically.

Program radio stations manually

You can program a maximum of 20 preset radio stations.

1

2

3	Press /	to select a number.
4	Press SET TIME/PROG to confirm.
5	Repeat the above steps to program other

stations.

Tip

•• To overwrite a programmed station, store another station in its place.

Select a preset radio station

1 Press / to select a preset number.

6	Other features
			E n g l i s h
Set the alarm timer
You can set two alarms which go off at different
time.
1	Ensure that you have set the clock correctly.
2	(See “Get started - Set time and date”.)
	Press and hold ALM 1 or ALM 2 for 2
	seconds.
3	»» [AL 1] or [AL 2] begin to blink.
	Press SOURCE on the top panel to select
	an alarm sound source: iPod/iPhone, FM
4	tuner, or buzzer.
	Press ALM 1 or ALM 2.
5	»» The hour digits begin to blink.
	Press /	repeatedly to set the hour.
6	Press ALM 1 or ALM 2 to confirm.
7	»» The minute digits begin to blink.
	Repeat steps 5-6 to set the minute.
8	Repeat steps 5-6 to select whether to
	ring alarm the whole week, on weekdays,
9	or at weekend.
	Repeat steps 5-6 to set the alarm volume.

Tip

•• If you set iPhone/iPod playlist as the sound source, you must create a playlist in iTunes called “PHILIPS” and import it to your iPhone/ iPod.

•• If no playlist is created in the iPod/iPhone or there is no song in the playlist, the unit will wake to songs in the iPod/iPhone.

Activate and deactivate the alarm timer

1 Press ALM 1 or ALM 2 repeatedly to activate or deactivate the timer.

»» If the timer is activated, [ AL 1] or [ AL2] is displayed.

»» If the timer is deactivated, [ AL1] or [ AL2] disappears.

EN 15