14Update the firmware through Philips Songbird
VIBE is controlled by an internal program called firmware. Newer versions of the firmware may have been released after you have purchased VIBE.
Through Philips Songbird, you can check for and install firmware updates for VIBE over the Internet.
Tip
•Your music files are not affected by a firmware update.
1Make sure that you have connected your PCto the Internet.
2As shown, connect the VIBE to the PC by using a USB cable.
3On the PC, launch Philips Songbird.
•If necessary, click Start > Programs
>Philips > Philips Songbird.
4Click VIBE in the Player pane. Then, select Tools > Check for updated firmware in the
»Philips Songbird checks for updates and installs new firmware from the Internet, if available.
5Follow the on-screen instructions.
»Downloading and installation of firmware update start automatically.
»The VIBE restarts after the firmware is updated and is ready for use again.
Note
•Wait until the update is completed, then disconnect the VIBE from the computer.
40EN