Philips SA4000 series manual Technical data, Message Updating firmware will be displayed

5When Update completed appears on the screen, click OK and disconnect the player.

>A message Updating firmware will be displayed.

The player will automatically restart after the firmware has been completely updated. Your player is now ready for use again.

7 Technical data

Power

• Power supply: AAA alkaline battery*

Display

•Picture / Display: Mono display, 32 x 128 pixels, 7 colour LCD backlight

Sound

•Channel separation: 45dB

•Equalizer settings: Rock / Jazz / Pop / Classical / Off

•Frequency response: 30-18000Hz

•Signal to noise ratio: > 85dB

•Output Power (RMS): 2x3mW

Audio Playback

•Compression format: MP3 (8-320 kbps and VBR; Sample rate: 8, 11.025, 16, 22.050, 24, 32, 44.1, 48kHz), WAV, WMA (5-192kbps)

•ID3-tag support: Song title and artist name

Recording

• Audio Capturing: Built-in microphone (Mono)

Storage Media

•Built-in memory capacity: SA400X 512MB NAND Flash + SA401X 1GB NAND Flash + SA402X 2GB NAND Flash +

Connectivity

• Headphone 3.5mm, USB 2.0++

Music transfer

• Windows Media Player 10

System Requirements

•Windows® XP (SP2 or above)

•Pentium Class 300MHz processor or higher

•128MB RAM

•500MB hard disk space

•Internet connection

•Microsoft Internet Explorer 6.0 or later

•Video display card

•Sound card

•USB port

*Battery life vary by use and settings.

+1MB = 1 million bytes; available storage capacity will be less. 1GB = 1 billion bytes; available storage capacity will be less.

Full memory capacity may not be available as some memory will be reserved for the player.

Storage capacity based on 4 minutes per song and 64kbps WMA

encoding.

++Actual transfer speed may vary based on your operating system and software configuration.

ENGLISH

Technical data 9