Philips SA4DOT04, SA4DOT02, SA4DOT08 Get started, Charge power, Switch the player on or off

Page 9

3 Get started

Charge power

SOUNDDOT has a built-in battery that can be charged through the USB socket of a computer.

Rotate the USB connector to connect SOUNDDOT to a PC.

»»During power charging, the indicator changes its color to denote the battery level.

»»When the battery is full, the green indicator lights up.

Tip

•• When the battery level is lower than 15%, the red indicator flashes and two beeps sound.

•• Rechargeable batteries have a limited number of charge cycles. Battery life and number of charge cycles vary by use and settings.

Switch the player on or off

Press and hold until the green or red indicator lights up.

»»Power on:The green indicator lights up. Music play starts.

»»Power off:The red indicator lights up. One beep sounds.

Automatic standby and shut-down

The player has an automatic standby and shut- down feature that can save battery power. After five minutes in idle mode (no play, no button is pressed), the player switches off.

EN 7

Image 9
Contents Always there to help you Page Contents General maintenance Important safety informationBe responsible! Respect copyrights Recycling the productPage Your new player Whats in the boxOverview Reset LED indicator and audio feedbackSwitch the player on or off Charge powerGet started Automatic standby and shut-downPlay music Change the volume levelTransfer music to the player Play musicSwitch the random play on or off Update the firmware through Philips Device Manager Page Troubleshooting PC requirements Technical dataSA4DOT12UMV3.0 wk1349.5