Philips SA5DOT user manual Get started, Charge power, Switch the player on or off

Page 9

3 Get started

Charge power

MINIDOT/FITDOT has a built-in battery that can be charged through the USB connector of a computer.

Connect MINIDOT/FITDOT to a PC by using the USB cable.

»»During power charging, the indicator changes its color to denote the battery level.

»»When the battery is full, the green indicator lights up.

Tip

•• When the battery level is lower than 15%, the red indicator flashes and two beeps sound.

•• Rechargeable batteries have a limited number of charge cycles. Battery life and number of charge cycles vary by use and settings.

Switch the player on or off

Press and hold until the green or red indicator lights up.

»»Power on:The green indicator lights up. Music play starts.

»»Power off:The red indicator lights up. One beep sounds.

Automatic standby and shut-down

The player has an automatic standby and shut- down feature that can save battery power. After five minutes in idle mode (no play, no button is pressed), the player switches off.

EN 7

Image 9
Contents Register your product and get support at Always there to help youPage Contents General maintenance About operating and storage temperaturesTranslation of this document is for reference only Be responsible! Respect copyrights Recycling the productCompliance with copyright laws remains your responsibility Data loggingPage Your new player Whats in the boxOverview Reset LED indicator and audio feedbackSwitch the player on or off Charge powerGet started Automatic standby and shut-downPlay music Change the volume levelTransfer music to the player Play musicDuring music play, press twice Switch the random play on or offUpdate the firmware through Philips Device Manager Update the firmware Troubleshooting Technical data PowerPC requirements SA5DOT12UMV3.0wk1350.3