AConnect a sound system
You can play music from an external appliance that is connected to the red and white LINE OUT jacks of NP2500.
1Consult the user manual of the external appliance to connect the supplied red and white cable to the auxiliary input jacks of the external appliance.
2Connect the other end of the red and white cable to the LINE OUT L / R jacks of NP2500.
3On the external appliance, set the source to AUX (auxiliary).
4Operate the controls of the external appliance to play music.
BConnect the player to the power supply
Connect the player to the power supply as shown in the diagram on page 4. After a short introduction demo, the player prompts you to select the location.
1Select the location / time zone and confirm.
>> The player shows the prompt for the network connection.
2
Select [Yes], to create a connection to the network.
>> The player shows the prompt for the network setup (if no network has been set up yet).
•
Select [No] to exit the setup and go to the Home menu.
This icon indicates steps on your remote control!
6