Philips PET1000/00 Disc can’t be played, Player does not, Control, Distorted or B/W, Output

PET1000_ENG.QXD 4/11/05 10:07 AM Page 28

English

Symptom	Remedy
Disc can’t be played	– Ensure the disc label is upwards.
	– Clean the disc.
	– Check if the disc is defective by trying
	another disc.
The player does not	– Aim the remote control directly at the
respond to the remote	sensor on the front of the player.Avoid all
control	obstacles that may interfere with the signal
	path. Inspect or replace the batteries.
Distorted or B/W	– Use only discs formatted according to the
picture with DVD	TV-set used (PAL/NTSC).
No audio at digital	– Check the digital connections.
output	– Check the SETUP menu to make sure that
	the digital output is set to on.

Player does not respond – Operations are not permitted by the disc.

to all operating	– Refer to the instructions in the disc inlay.
commands during
playback
Player feels warm	– When the player is in use for a long period
	of time, the surface will be heated. This is
	normal.

28