Install remote control battery

»The charge indicator turns on. It takes about 7.0 hours to fully charge the battery.

»When the battery is fully charged, the charge indicator turns off.

Caution

•Risk of explosion! Keep batteries away from heat, sunshine or ﬁ re. Never discard batteries in ﬁ re.

•Risk of decreased battery life! Never mix different brands or types of batteries.

•Risk of product damage! When the remote control is not used for long periods, remove the batteries.

•Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

•Perchlorate Material - special handling may apply. See www.dtsc.ca.gov/ hazardouswaste/perchlorate.

For ﬁ rst-time use:

1Remove the protective tab to activate the remote control battery.

To replace the remote control battery:

2Open the battery compartment.

3Insert 1 CR2025 battery with correct polarity (+/-) as indicated.

4Close the battery compartment.

16EN