Philips PD9000/05 user manual Install remote control battery

Page 16

»» The CHR indicator turns on (red). It takes about 7 hours to fully charge the battery.

»» When the battery is fully charged, the CHR indicator turns off.

Install remote control battery

Caution

•• Risk of explosion! Keep batteries away from heat, sunshine or fire. Never discard batteries in fire.

•• Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

•• Batteries contain chemical substances, they should be disposed of properly.

•• Perchlorate Material - special handling may apply. See www.dtsc.ca.gov/ hazardouswaste/perchlorate.

For first-time use:

1Remove the protective tab to activate the remote control battery.

To replace the remote control battery:

1Open the battery compartment.

2Insert 1 CR2025 battery with correct polarity (+/-) as indicated.

3Close the battery compartment.

16EN

Image 16
Contents Register your product and get support at Page Contents Important Safety Instructions English Hearing safety Recycling Page This apparatus includes this label Introduction Your portable DVD playerWhat’s in the box Overview of the main unit Power ON/OFF CHR SetupCHR/IR Disc MenuOverview of the remote control DisplayZoom SUBRepeat 1/ALL B RepeatAngle Charge the battery Get startedInstall remote control battery Connect additional equipment Use your player Turn onSelect OSD language Play discsAdjust settings Play optionsProduct information PAL & NtscTroubleshooting