Haier AC142ACEEA, AC182ACERA, AC242ACERA Cleaning and Care, Cleaning the Air Filter

Page 7

Cleaning and Care

CAUTION!

Before cleaning the air conditioner ,be sure to turn it off and disconnect

 

the Power Supply Cord.

 

 

Be sure the Intake Grill is installed securely.

 

When removing and replacing the air filters, be sure not to touch the heat

 

exchanger, as personal injury may result.

Cleaning the Air Filter

Open the Intake Grill

1.Pull out both sides and the center of the Intake Grill.

4.Re-attach the Air Filters to the Intake Grill.

1The Filters fit onto the inside of the intake Grill. (figure 1)

2The bottom edges of the Air Filters should fit into the filter brackets. (figure 1)

3The Air Filters should be pushed down so that their top edges fit under the projections at the top of the Intake Grill. (figure 2)

 

 

Air Filter

 

About 30 mm

Side Panel

 

(Figure 2)

Hook

(Figure 1)

 

 

 

 

Notch

 

 

 

Arm

Filter bracket

 

 

 

 

Arm

 

 

 

 

Intake Grill

 

 

2.Pull the Air Filters upward to remove them.

5.Push in both sides and the center of the Intake Grill.

Push the Air Filter handles away from the Intake Grille in direction as illustrated, then pull out Air Filters.

Air Filter

Bracket

Base

Handle

3.Clean the Air Filters.

Remove the dust from the Air Filters by vacuum cleaner or washing them. After washing, allow the Air Filters to dry thoroughly in an area protected from sunlight.

Dust can be cleaned from the Air Filter either with a vacuum cleaner, or by washing the filter in a solution of mild detergent and warm water. If you wash the filter, be sure to allow it to dry thoroughly in a shady place before reinstalling.

If dirt is allowed to accumulate on the Air Filter, air flow will be reduced, lowering operating efficiency and increasing noise. During periods of normal use, the Air Filters should be cleaned every two weeks.

5

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Operation & Installation Manual Contents Disposal of the old air conditioner DB C WB C Maximum Minimum IndoorDB C WB CSafety Precautions Indoor Unit Name of PartsCleaning the Air Filter Cleaning and CareDrain hose Operation TipsPiping hole cover Location InstallationSelecting the Mounting Position Installation ProceduresWall 6mm Rear 7cm Right Indoor unit Preparing Indoor Unit InstallationFloor Console Type Drilling for PipingDrain pan Drain hose Insulation Drain hose Installing Drain HoseUnder Ceiling Type Drain pan Nylon fastener Drain hoseWith a concrete drill, drill four 12.7 mm dia. Holes Installing BracketsSelect piping and drain directions WallInstall the Drain Hose Connecting the PipingFlare Processing Round terminal InsulationIndoor Unit Side Electrical WiringElectrical Requirement Customer Guidance Electrical WiringMount the Cover Plate Intake Grill Check ItemsMount the intake grill Followings are not problems Trouble ShootingPoor cooling or heating Error display For *.ERA Error display For *.EAA Haier Group

AC182ACEEA, AC242ACEEA, AC242ACERA, AC182ACERA, AC142ACEEA specifications

The Haier AC142ACEEA, AC182ACERA, AC242ACERA, AC182ACEEA, and AC242ACEEA models represent a significant advancement in home cooling technology. These air conditioning units are designed with energy efficiency, user comfort, and modern aesthetics in mind, making them suitable for a range of residential and commercial applications.

One of the defining features of these Haier models is their energy efficiency rating. They come equipped with inverter technology, which allows the compressor to adjust its speed according to the cooling demand. This results in less energy consumption compared to traditional air conditioning units, providing significant savings on electricity bills while reducing the carbon footprint.

Each model boasts a sleek, contemporary design that enhances the interior décor of any room. The compact size of the units ensures easy installation without occupying unnecessary space. Additionally, the quiet operation technology minimizes noise levels, making them ideal for bedrooms and workspaces.

These air conditioners feature advanced air purification systems that filter dust, allergens, and other pollutants, ensuring that the air remains clean and healthy. This is particularly beneficial for allergy sufferers or anyone living in urban areas with high levels of air pollution.

Furthermore, the intuitive control panel and compatible remote access feature allow users to adjust settings conveniently. Many of these models are compatible with smart home technology, enabling remote control via smartphone apps. This integration allows for seamless temperature adjustments and scheduling, enhancing user convenience.

The Haier AC units also incorporate multi-functional modes, including cooling, heating, dehumidification, and fan mode. This versatility ensures that they can be used year-round, accommodating varying climate conditions. The rapid cooling feature ensures that rooms reach the desired temperature in a matter of minutes.

Durability and low-maintenance design are also key characteristics of these models. The units are built with high-quality components that are resistant to corrosion and wear, extending their lifespan. Easy-to-clean filters ensure that the air conditioners remain efficient and effective with minimal upkeep.

In conclusion, the Haier AC142ACEEA, AC182ACERA, AC242ACERA, AC182ACEEA, and AC242ACEEA models combine energy efficiency, advanced technology, and user-friendly features. Their sleek design, powerful cooling capabilities, and smart technology integration make them an excellent choice for anyone looking to enhance their indoor climate control experience.
Top Page Image Contents