Switching OFF the alarm

•Alarm (AL 2):

Press the button ALARM II y and carry out the same steps as described above. The indicator for Alarm II appears on the display.

➩Now select the wake-up mode using the function selector switch 2@ (CD, TUNER or BUZZER).

•Alarm mode BUZZER. Move the func- tion selector switch 2@ to the BUZZER position.

•Alarm mode Radio

➩Carry out the steps 1 to 7 described under "Radio operation" to tune the radio to your desired station for the radio alarm.

•Alarm mode CD player

1. Open the CD compartment w and insert the CD (with the label facing to the rear) into the CD compartment and close the CD compartment.

2. Push the function selector switch 2@ to position CD.

The total playing time of the CD player in Alarm mode is 60 minutes.

If no CD is inserted and alarm mode CD player is set, the alarm signal of the setting BUZZER sounds automa- tically.

The alarm time is programmed for 60 minutes.

➩SNOOZE: Press the button SNOOZE a to switch off the alarm temporarily. The alarm will then sound again after roughly 6 minutes.

➩ON/OFF: Press button ON/OFF 1#. The alarm is switched off, but will sound again after 24 hours.

➩ALARM I/ALARM II: Press the ALARM I / ALARM II y button to

switch off the alarm permanently.

Sleep timer

➩Move the function selector switch 2@ to position CD or TUNER.

➩When you press the button SLEEP i, "90" appears on the display.

➩Press the button SLEEP i again to set the desired sleep time (90, 60, 30 or 15 minutes). This starts after a few seconds.

➩To stop the playback earlier, press the button ON/OFF 1#.

If the playing time of the CD is shor- ter than the sleep time set by you, the music ends as soon as all the tracks on the CD have been played.

- 9 -