Panasonic SC-AK770 Advanced play, Checking the track information, Program play, Repeat play

Press [DISC] and then [1] ~ [5] to select the disc.

Checking the track information

You can select a desired disc display mode.

Press [DISPLAY] during play or pause.

Elapsed play time	Remaining play time				Track
Elapsed		Remaining		Album
play time			play time	Name	Name
			Tag
Playing bit rate				Tag	Tag
(during play only)			(Artist)	(Track)	(Album)
Note:

•“NO TAG” is displayed if titles with tags have not been entered.

•Maximum number of displayable characters: approximately 30

•This unit can display album, track and artist name with MP3 ID3 tags (version 1.0 and 1.1).

•ID3 is a tag embedded in MP3 track to provide information about the track.

•Titles containing text data that the unit does not support cannot be displayed.

•Titles entered with 2-byte code cannot be displayed correctly on this unit.

5 Press [4 , / REW] or [¢ , / FF] to select the track.

6 Press [OK].

Repeat steps 4 to 6 to program other tracks.

7 Press [6 , CD] to start play.

For two-digit track, press [h10] once then the two digits. For three-digit track, press [h10] twice then the three digits.

To	Action
Cancel	Press [PROGRAM] in the stop mode.
program mode
Replay the	Press [PROGRAM] then [6, CD] in the stop
program	mode.
Add to the
program	Repeat steps 3 to 4 in the stop mode.
	Repeat steps 4 to 6 in the stop mode.
Check	Press [4, / REW] or [¢, / FF] when
program	“PGM” is displayed in the stop mode.
contents
	The track number, program order and disc
	number are displayed:
	Track number Program order

Advanced play

Program play

This function allows you to program up to 24 tracks.

1 Press [6 , CD] and then [7 , CLEAR].

2 Press [PROGRAM].

“PGM” appears.

3

4 Press the numeric buttons to select your desired track. Repeat steps 3 to 4 to program other tracks.

5 Press [6 , CD] to start play.

1 Press [DISC] and then [1] ~ [5] to select the disc.

2 Press [7 , CLEAR].

3 Press [PROGRAM].

4 Press [5/∞, ALBUM] to select your desired album.

	The program order is displayed followed by the
	album number and track number.
Clear the last	Press [DEL] in the stop mode.
track
Clear all	Press [7, CLEAR] in the stop mode.
programmed	“CLEAR ALL” is displayed.
tracks

Note:

•You cannot program CD-DA together with MP3 tracks.

•The program memory is cleared when you change a disc or open the disc tray.

•You cannot program more than one disc.

Repeat play

You can repeat program play or other selected play mode.

Press [REPEAT].

“ ” is displayed.

To cancel

Press [REPEAT] again. “ ” is cleared.

Note:

You can use repeat mode with “Program play” (\ see left) and “Play Mode function” (\ page 10).

RQTV0286

11