¸
Connecting Your iPod
Adjusting VIA!migo to Fit Your iPod
The VIA!migo can fit any dockable iPod. It can even be used with many iPod protective cases left on. The first time you use your iPod, and if you ever use another size iPod, you should adjust the VIA!migo’s Support Stand to accommodate your particular iPod. See Figure 14 for an example.
To adjust the VIA!migo to fit your iPod:
1.Loosen the Support Stand screw and slide the Support Stand as far back as it can go;
2.Connect your iPod by carefully lowering it onto the iPod dock connector of the VIA!migo.
3.Slide the Support Stand toward the iPod until the iPod is gently rest ing against the Support Stand Pad. The back of the iPod should be parallel to the Support Stand and not leaning forward or backward.
4.Tighten the Support Stand Screw to keep in place. DO NOT overtighten.
©2007 ELAN Home Systems • All Rights Reserved | 21 |