Haier HPU-42CF03 Installation procedures, Shield, Place with enough space for smooth air flow

Page 23

Installation procedures

Display of whole unit

Try to bring the packed unit to the installation place.

When it is inevitable to unpack the unit, be careful not to damage the unit. Wrap it with nylon etc.

After unpacking, be sure to put it with the front side of the unit facing up.

Delivery

Note: When delivering, don't hold plastic parts like inlet and outlet grill etc.

Facing up

Installation of outdoor unit

Selection of installation place

Place strong enough to support the unit and will

 

over 30cm

 

 

not cause vibration and noise.

 

 

Place where discharged wind and noise doesn't

 

 

cause a nuisance to the neighbors.

 

 

Place where is less affected by rain or direct

 

 

sunlight and is sufficiently ventilated, or to install

over 10cm

 

a shield.

over 10cm

over15cm

 

 

Place with enough space for smooth air flow.

over 60cm

 

Fixing of the unit

Fix outdoor unit using M10 bolt to concrete floor horizontally.

If installed on the wall or on top of a roof, bracket should be fixed securely to resist earthquake or storms.

Use rubber pad during installation against unit vibration.

410

447

180

646

180

Installation dimension of outdoor unit (mm)

21

Image 23
Contents Operation & Installation Manual Operation ContentDisposal of the old air conditioner Machine is adaptive in following situation Refrigerating circuit is leak-proofParts Inlet grill Outlet grill Remote controllerTemp Setting Button Operation ModeTimer Button Reset ButtonBattery loading Press ON/OFF button,unit stops OperationAir conditioner will run at the selected fan speed OFF Unit startAdjusting air flow direction Heat mode One hour after sleeping operation start, the temperatureCOOL,DRY mode Cancel Timer mode Timer mode selectionTimer setting press time adjust buttons Confirm settingTime confirming for Timer OFF Time setting for Timer onTimer confirming for Timer on Timer setting for Timer OFFUnit operation Operation hintsKeep proper room temp Energy savingDont spray any paint or insecticide on the unit MaintenanceDont splash water directly on indoor unit Indoor and outdoor cleaning Followings are not problems Trouble shootingIs there any direct sunlight in the room? When problems occurPower supply failure? switch is not set At on Is air filter too dirty?Power supply Errors displayOver 10cm Indoor & outdoor unit connectionOver 10cm Over 15cmTools necessary Tools necessaryPlace with enough space for smooth air flow Installation proceduresInstallation dimension of outdoor unit mm ShieldWall hole Fixing of the unitPiping connection Installation of L-shaped metalIndoor unit Slope Good Down 325 650 975 1300 1625 10m 15m 20m 25m 30mInsert the cable from inside the wall Hole Installation procedures Electric wiring

HPU-42CF03 specifications

The Haier HPU-42CF03 is a sophisticated air conditioning unit designed to deliver exceptional cooling and heating results for both residential and commercial spaces. With an impressive capacity of 42,000 BTU, this model offers energy efficiency and performance, ensuring comfortable environments year-round.

One of the standout features of the HPU-42CF03 is its inverter technology. This advanced system allows the unit to vary its compressor speed according to the cooling or heating demand. Consequently, it operates more quietly and consumes less energy compared to traditional fixed-speed air conditioners. This means lower electricity bills and a reduced environmental footprint, making it a smart choice for eco-conscious consumers.

Another notable characteristic of the Haier HPU-42CF03 is its multi-function design. This model supports not just cooling, but also heating, dehumidification, and ventilation functions. Its ability to provide both cooling and heating makes it a versatile solution for year-round comfort, allowing users to switch between modes as the seasons change.

The unit is equipped with a high-efficiency air filter that captures dust, allergens, and other pollutants from the air. This feature improves indoor air quality, which is crucial for those with allergies or respiratory issues. The filter is easily removable and washable, simplifying maintenance and ensuring the unit operates at peak efficiency.

Smart features add to the HPU-42CF03’s appeal. The air conditioner can be controlled via remote control, providing convenience in adjusting settings from a distance. Additionally, it is compatible with smart home systems, allowing for seamless integration and control through smartphones or voice commands.

Durability and design are also key aspects of this model. The HPU-42CF03 features a robust construction that withstands varying weather conditions, while its sleek design complements modern interiors. The unit is designed for easy installation and maintenance, reducing downtime and ensuring reliable performance.

In summary, the Haier HPU-42CF03 stands out with its inverter technology, multi-function capabilities, high-efficiency air filtration, smart connectivity, and durable design. These features make it an excellent choice for anyone seeking reliable and efficient climate control in their living or working spaces. With the Haier HPU-42CF03, users can expect comfort, efficiency, and enhanced air quality, all wrapped in a user-friendly package.