Grace SCN300W manual Trouble Shooting, No Sound

Page 11

TROUBLE SHOOTING

NO SOUND

-Ensure the AC adaptor is fully inserted into the AC outlet and the power connection input on the transmitter.

-Ensure the speaker is switch ON.

-Speaker’s battery capacity is too low, replace with new batteries or connect the AC adaptors to the speakers.

-Ensure the TV or audio component is ON.

-The connected audio / video equipment is not playing. Start playing the equipment.

-The volume of speaker is too low, adjust the volume to an appropriate level.

DISTORTED

-Press the “AUTO TUNE” button on the speakers until matching the frequency of the transmitter.

-Change the position of the channel selector on the transmitter. You must then press the “AUTO TUNE” button on the speakers.

-Battery capacity is too low. Replace with the new battery.

-Ensure the volume level of speakers is adjusted properly.

-The speaker is too far from transmitter, move closer.

-The input level of the audio signal is too low. Turn up the volume of the audio source equipment.

11

Image 11
Contents Schooners Table of Contents Introduction ContentsFeatures Component Identification Speaker Remote Control InstallationInstallation Speaker Operation Other Control Switching OFFNo Sound Trouble ShootingTechnical Specifications Proposition Contact